Allparts P-Style Bass Wiring Kit

Start 360°

Vis oversættelse

Wiring Kit for Electric Bass

For P-Style models
CRL (Centralab), CTS, Switchcraft, and Sprague are original parts for many sought-after vintage US guitars
Allparts Nr. EP-4139-000-ASMBLY

Set consists of:

Switchcraft jack socket
2x CTS 250 kOhm potentiometers
Sprague Orange Drop .047mfd capacitor
30 cm each of black and white fabric-covered stranded wire
Precision bass wiring diagram (English)

Fås siden April 2019
Artikelnummer 462012
salgsenhed 1 stk
Design Prewired Harness/Wiring Kit
Resistance Value 250 kOhms
Characteristic Curve Logarithmic
Thread Length in mm 9,5 mm
Tandem Poti No
Push/Push No
Solderless No
shaft type Smooth

225 kr

Alle priser inkl. moms

Salgsrang

i Potentiometre

Kunder som så på dette produkt købte dette

Allparts J-Style Bass Wiring Kit

298 kr

købt

Allparts CTS 250K 9,5 Spl Aud.Taper Pot

75 kr

købt

Allparts CTS 500K Audio Taper Pot

75 kr

købt

Göldo 250K Std. Split AT Pot

35 kr

85 Kundebedømmelser

5 72 Kunder 4 9 Kunder 3 2 Kunder 2 1 Kunde 1 1 Kunde

4.8 / 5

forarbejdning

Retningslinjer for anmeldelser

60 Anmeldelser

Quality replacement

Rechrist 11.10.2025

I changed the pots and the output jack on a Fender 1951 P-bass copy.

You have to have some soldering skils, but I find the result on parr with the Mojotone kit, where most of the soldering i done for you.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

P-style bass project

BassRo 19.05.2020

I used this as replacement kit to retrofit an old bass. Good quality, fair price, easy to install, wiring diagram layout is included as well.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Just what I needed

Obrad L 27.08.2020

Everything works just fine, like I wanted. Real ''vintage'' sound with Fender CS'62 pickup.
Be sure to use a minimum amount of wire if you want to have enough also for the ground under the bridge.
5-10 cm more wire and it would be perfect, although I managed to install the grounding with this.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Perfect P Bass sound.

Woodwork Barn 16.09.2025

Nice clear diagram, very easy to assemble and solder. I ordered this for a home-made Precision bass, I have used the Allparts J-Style wiring kit before and was very happy with the finished result. I was careful with not using up too much wire and was left with 4cm of the black and 10cm of the white wire at the end. I used Wilkinson alnico 5 pickups and EB Slinkys on this build and I am over the moon with the end result, it looks nice and tidy, the pots feel and sound smooth and the bass sounds fantastic, exactly as a new Fender Precision does. All in all a simple but excellent value wiring kit with good quality components... Does the job perfectly! :)

Anmeld bedømmelse

Læs alle anmeldelser

Allparts P-Style Bass Wiring Kit

Wiring Kit for Electric Bass

Ledningssæt til elbas

Kunder som så på dette produkt købte dette

85 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

60 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Allparts P-Style Bass Wiring Kit

Wiring Kit for Electric Bass

Ledningssæt til elbas

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

85 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

60 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator