Cioks Sol

I am driving a small pedalboard with only 4 pedals, so I needed a small but powerful unit. Because one of my pedal is a MIDI foot switch controller which draws 500mAh of current at 9V. This unit gives you 660 mAh per output at 9V and it's plenty ! No power drops and absolutely 0 buzz !

This comes with a plethora of flex cables to suit your needs. Short, longs, split, reverse polarity...
I currently use the Y flex cable to daisy chain a low power a tuner and a booster on 1 single output and also 2 single flex cable for the other 2 pedals, meaning I still have 2 spare outputs out of 5. This is brilliant!

The highlight for me is that thing is Modular. I'm planning to get a Shure wireless emitter that runs at 12/15V but is centre positive,... yikes !...
Not a problem when you own a Cioks unit. I can run this with the CIOKS SOL, I don't have to carry another PSU, i can just change the output setting on 1 out to 12V, use the red polarity switch flex cable and "voila". Sorted !
[EDIT: I got a SHURE BLX Wireless system and it works absolutely brilliantly because of the modular power supplied by the CIOKS - Incredible]

It's like magic. I love it. it's light, small, inconspicuous and powerfully modular, perfect. I will recommend Cioks 110% from now on.

The Cioks Sol is a compact yet powerful power supply for pedalboards, offering clean and reliable power in a slim, lightweight design. With five isolated outputs and flexible voltage options (9V, 12V, and 18V), it can handle a variety of pedals, from standard effects to power-hungry units.

One of its biggest strengths is the ultra-low noise performance, ensuring a hum-free signal. The build quality is excellent, and the compact size makes it perfect for pedalboards where space is limited. It’s also compatible with the Cioks expansion system, allowing for easy upgrades if you need more power in the future.

The only minor downside is that it doesn’t come with as many outputs as larger power supplies, but for small to medium-sized setups, it’s a fantastic option.

⭐️⭐️⭐️⭐️⭐️

I have D'darrio XPND 1.
It barely fits under this board — one should put it as high under the board as possible, but it fits, and that's what matters. Outputs are isolated, and it's efficient.

It comes with an assortment of 9 cables for pedal powering.

Heads up! 5 outputs might not be enough for this exact pedalboard using packaged cables, given you are fitting only Boss-type pedals, because it can fit at least 7 of those.

The box has a 3-way daisy chain type 1 cable, which allows you to connect 3 pedals that don't require isolated inputs from a single output and are not power hungry, but it might not be the case.
For example, to connect HX Stomp, one would need to buy a Parallel adapter Flex from Cioks separately or a similar current doubler cable that uses two outputs to double the current into a single power input for HX Stomp. That's what I need to do to power my HX Stomp using Sol. That I don't like and my only big irk.

However, unless you have more than 5 pedals and all require more than 9V of isolated power, you should be all set from the get-go.

I would love if they put a velcro in the box, but it doesn't have that too.

Other than that, everything is just perfect, love it.