Doepfer A-101-1

Vis oversættelse

Vactrol Steiner Filter

In contrast to the original circuit, the A-101-1 vactrols are used instead of diodes as variable resistors for frequency control
2 LEDs provide information on the currently set frequency and resonance
Width: 16 HP / 80.9 mm
Depth: 50 mm (measured from the rear side of the front panel)
Power requirements: +30 mA (+12 V) / -30 mA (-12 V)

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden Marts 2006
Artikelnummer 189174
salgsenhed 1 stk
Width 16 TE / HP

Vis varianter af dette produkt

Doepfer A-101-1

...

1.099 kr

til produktet

Doepfer A-160-2 Clock Divider II

...

749 kr

til produktet

123

Doepfer A-180-2 Multiples

...

266 kr

til produktet

154

Doepfer A-124 Wasp Filter SE

...

666 kr

til produktet

Doepfer A-124-2 SE

...

899 kr

til produktet

Doepfer A-138M

...

1.135 kr

til produktet

Doepfer A-198 (Module + Manual)

...

1.666 kr

til produktet

Doepfer A-156

...

899 kr

til produktet

Doepfer A-151

...

444 kr

til produktet

Doepfer A-178 Theremin

...

753 kr

til produktet

Doepfer A-199 Spring Reverb Module

...

899 kr

til produktet

Doepfer A-156 Vintage Edition

...

990 kr

til produktet

1.099 kr

Alle priser inkl. moms

Salgsrang

i Filtermoduler

10 Kundebedømmelser

5 9 Kunder 4 0 Kunder 3 1 Kunde 2 0 Kunder 1 0 Kunder

4.8 / 5

betjening

features

lyd

forarbejdning

Retningslinjer for anmeldelser

5 Anmeldelser

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Excellent addition or 1st filter

VinceJ 15.02.2015

I'm a newbie to modular but already have an MFB low pass and wanted to expand my small setups reportiore with a different filter. After looking at all the Dopefer ones on offer and viewing a couple of you tube videos I opted for the A-101-1 Vactrol. So far it's been really great, very flexible and with a really nice soft round sound a little sem like to my untrained ears. Being able to feed the LP, BP and HP sections independantly is great. The cv inputs affect all three filter types equally but there is independant control over the output of each filter. I'd recommend the A-101-1 to anyone looking for an alternative to the standard LP filter and without the funds required for some of the more exotic offerings from other manufacters. I love it.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

A filter with great character

Anonym 26.06.2016

I love this module, and it's surprisingly versatile. The ability to input different signals to the LP, BP and HF inputs can lead to some really interesting sounds, although using them individually they also sound and work great. The filter itself has a very unique and warm character, the LP in particular has a lovely "fuzziness" about it. As with a lot of the Doepfer modules a bit of creativity will get a lot out of a very affordable module. I have had this module for about 6 months now and I am still enjoying experimenting with different modulation sources and combinations of inputted signal. A great character filter and great value for money.

Anmeld bedømmelse

Læs alle anmeldelser

Doepfer A-101-1

Vactrol Steiner Filter

Vactrol Steiner-filter

10 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

5 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Doepfer A-101-1

Vactrol Steiner Filter

Vactrol Steiner-filter

Tilbehør og matchende produkter

10 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

5 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator