My absolute favorite interface for under 100 ? !
Just for your information first: I design so light shows , in the middle frame , as I would say thomann , ie with approximately ( depending on performance ) up to 16 moving heads , lots of Par Light and LED Pars .
When I saw the article here on the website , told me first on the pictures the blue body color not to - black I would have been leiber - already after thomann unpacking I liked the case then very good.
It is not necessary a driver (which it on the website are Enttec ) to download - at least it was not the case with me . So it goes without going on the same time-consuming and annoying Installierarbeiten .
Use the interface thomann in connection with the DMX control software " Freestyler" and am more than satisfied. It is suitable for almost all software and freeware for Art-Net . It includes a complete DMX Universe - that is, 512 channels.
Done The output of the DMX data, even using many channels , in my view , very fast !
Thomann only criticism is the somewhat loose on the housing mounted USB port that can not be verrigeln Also when connecting a cable so that the cable talk easily slide out - you know this but , there should be no problem prevent this .
NOTE : It is advisable to connect a DMX Adapter Cable 5-pol. male - thomann 3 -pol. female equal to order with , unless one is in possession of such a cable . Available here at Thomann already for less than ? 5 . Just as a tip on the edge .
){kind=logo}
