Til sidens indhold

Warwick Potentiometer Dome Knob Black

4.6 ud af 5 stjerner fra 125 kundebedømmelser

Tandem Potentiometer Knob Made of Metal

  • Structure: Staggered
  • With dot markings
  • Screw-on
  • Rounded head
  • Colour: Black

Lower knob:

  • Outer diameter: 20.1 mm
  • Inner shaft attachment: 6.05 mm

Upper knob:

  • Outer diameter: 18.16 mm
  • Inner shaft attachment: 4.12 mm
  • Fås siden Juli 2006
  • Artikelnummer 196577
  • salgsenhed 1 stk
  • Colour Black
  • Shape / Design Dome, Tandem
  • Included In Delivery (Amount) 1
  • Screwable Yes
  • Pluggable No
48 kr
Alle priser inkl. moms
På lager indenfor 1-2 uger
1

125 Kundebedømmelser

4.6 / 5

forarbejdning

47 Anmeldelser

D
NB! Doesn't fit CTS stacked potentiometer
DBMTB 30.03.2021
Can't really fault the product but the description could have been better. So the 3 stars reflect the Thomann presentation rather than the product itself, which is probably just fine.
I bought this thinking it was the cheapest way to get a knob for a stacked potentiometer - but found out the holes were too small.
Was able to fix by drilling them out a bit - but for those not wanting to have to modify them before use, buy the Allparts one instead. Not sure why these are sized differently.
Note to Thomann - you need to update the product description to prevent others making the same mistake as me.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
A
Stacked potiknobs - difficult to use
Anonym 26.01.2017
Last year I decided to give a new life to my oldest guitar - a Washburn with a very pleasant/playable neck.
I changed all hardware - pretty much using it as a guinei-pig guitar for testing new hardware. It ended up a brilliantly sounding guitar with Schaller loking tuners, Babicz bridge, Seymour Duncan pickups.

Unfortunately I thought about using stacked pots - and stacked potiknobs.
PROS:
- sturdy construction, looks good
CONS
- they did not match the only 250/500 pot found in store (from AllParts), had a hard time tightening them
- the two pots (the ring and the knob) hardly work simultaneousely without influencing each other, ie: I cannot change volume without affecting tone and vice-versa

Bad choice from my part, I wanted to avoid drilling a new hole, now it seems a much better solution
forarbejdning
1
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
A
Be wary that the inner shaft space is quite small
Adrian0072 20.08.2020
The inner shaft space for the upper knob is quite small and didnt fit my pots, so I had to repurpose them. The bottom ring fits normal pots. The quality is superb.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
m
Perfect replacements
maschmann 13.02.2014
The only thing I have to criticize is some kind of dullness the black poti knobs have, when first unpacked. I bought a lot of those knobs (single and tandem) and got the same strange "patina".
Using a microfleece to clean them up helps, though.
I've got lot of bass guitars and into three of them, I installed Glockenklang 3-band electronics. Since I don't like too many poti knobs, I'm using the stacked ones. Exactly for that purpose, these tandem knobs work absolutely fine. On my Warwick $$5, you really can't say if the bass didn't have that tandem-knob right from the start ;-)
Mounting is no problem, all you need is a small allan wrench (older models need a normal screw driver) and you are set. Pro tip: Use a sheet of paper, fold it 3-4 times and lay it on your bass before you mount the knobs, touching the poti axis. This way you ensure there's a minimal gap between knob and body to leave it moving freely.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse