Til sidens indhold

Allparts 500k LinearTaper Push/Pull Pot

4.7 ud af 5 stjerner fra 65 kundebedømmelser

Linear Push/Pull Potentiometer

  • Linear 500 kΩ potentiometer
  • Push/Pull switching function
  • Knurled shaft with standard length
  • Thread height: 9.0 mm
  • Thread diameter: 9.4 mm
  • Fås siden Juni 2016
  • Artikelnummer 388506
  • salgsenhed 1 stk
  • Design Linear Taper
  • Resistance Value 500 kOhms
  • Characteristic Curve Linear
  • Thread Length in mm 10,0 mm
  • Tandem Poti No
  • Push/Push Push/Pull
  • Solderless No
  • shaft type grooved
82 kr
Alle priser inkl. moms
på lager
1

65 Kundebedømmelser

4.7 / 5

forarbejdning

34 Anmeldelser

EA
Push/pull
Epiphone AJ220S 10.03.2021
Fik den ikke til at virke.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
A
Thank God for this part!!
Adrian0072 20.08.2020
I bought a Squier Bullet Mustang and thought this would not fit in the thinner Squier body, I was wrong, it fit perfectly! Nonetheless i soldered all my ground connections to the side of the pot and not the bottom. The pot turns smoothly but not too smoothly, and the push/pull works like a charm!
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
T
alright
T&Sunborn 31.12.2019
No problems within 6 months of moderate use.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
B
has a few quirks
Belgian 03.03.2019
I used this pot on my mexican blacktop tele when upgrading the electronics.
There are a few notable things with this pot:
Pro's:
-good quality contacts for soldering
-good sound quality, especially when combined with a good capacitor
-smooth operation of the pot and the push/pull switch
Con's:
-larger than standard thread, for which I had to drill out the holes in my tele control plate to make it fit
-The grounding point is a bit small, which makes it slightly harder to solder a star point for grounding.
-the shaft is on the shorter side
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse