Artec ETN-4 Preamp

Start 360°

Vis oversættelse

Preamp for acoustic guitars

4-Band EQ
Presence control
Master volume control
Built-in chromatic tuner
Slim shape (45 mm width)
For upper bout mounting
Battery status indicator
Dimensions: 90 x 45 x 50 mm
Output: Mini jack 3.5 mm
Piezo input: 2.5 mm jack
Aux input: Mini jack
Without pickup

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden April 2012
Artikelnummer 278252
salgsenhed 1 stk

251 kr

Alle priser inkl. moms

Salgsrang

i For-forstærkere til akustiske guitarer

41 Kundebedømmelser

5 13 Kunder 4 17 Kunder 3 7 Kunder 2 3 Kunder 1 1 Kunde

3.9 / 5

features

betjening

lyd

forarbejdning

Retningslinjer for anmeldelser

25 Anmeldelser

du får hvad du betaler for

soundcare 27.11.2017

jer er yderst tilfreds men produktet, det eneste jeg savnede var
en skabelong til at skære hullet efter

features

lyd

forarbejdning

betjening

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Does the job, and was a reasonable price

Skirt Hanson 07.02.2022

Easy to install, easy to use, does the job at the right price!

features

lyd

forarbejdning

betjening

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Almost a drop in replacement for the LR Baggs LR-F preamp on a Crafter CT120

Entropia Guitars 17.02.2026

A customer's Crafter CT120 Acoustic's electrics died. After fault finding, it turned out to be the preamp, and even a re-cap of the board didn't resolve. Trying to find a replacement LR-F LR Baggs Preamp proved impossible for over 6 months, none to be found, even used.

I took a chance on this preamp as it was slightly wider but overall looked like a good candidate ... and well what do you know, it pretty much works.

You do need to modify the lower metal retaining plate by filing off some of the curve for it to fit in. After installation, the rear 2 holes from the original preamp are covered, but the front 2 remain visible. I've filled these in and colour matched the aged binding and wood and it's all but imperceptible that this is not the original unit - it's that good of a fit.

Hopefully this will help anyone else searching for a drop in replacement for the Crafter CT120 preamp when their LR Baggs unit dies.

features

lyd

forarbejdning

betjening

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

very good

Ronnie R. 27.09.2016

this is a good basic preamp with tuner built in, I fitted it to a friends guitar and it's way ahead of the original. definitely a must for amping a guitar on a budget

features

lyd

forarbejdning

betjening

Anmeld bedømmelse

Læs alle anmeldelser

Artec ETN-4 Preamp

Preamp for acoustic guitars

Forforstærker til akustiske guitarer

41 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

25 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Artec ETN-4 Preamp

Preamp for acoustic guitars

Forforstærker til akustiske guitarer

Tilbehør og matchende produkter

41 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

25 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator