Til sidens indhold

DSP-controlled 8-in-1 cable tester

  • 3 Modes: Cable Tester, Installed Cable Tester and Test Sound Mode
  • Equipped with inputs and outputs for XLR, SpeakerTwist, 6.3 mm and 3.5 mm stereo jack, RCA, RJ45, MIDI and USB
  • LED display
  • Continuity testing and intermittent contact detection
  • Phantom power and ground test
  • Test tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV
  • Operation with 2 batteries AA (not included)
  • Fås siden August 2016
  • Artikelnummer 393712
  • salgsenhed 1 stk
  • Cable Tester Yes
  • Level Meter No
  • Speaker Tester Yes
  • Software No
298 kr
Alle priser inkl. moms
på lager
1

158 Kundebedømmelser

4.5 / 5

features

forarbejdning

92 Anmeldelser

S
Rigtig god
Setling 21.08.2022
Man kan dog ikke teste mono jack kabler uden den melder fejl på kablet
forarbejdning
features
0
0
Anmeld bedømmelse

Anmeld bedømmelse

DF
Virkelig fint produkt
Dennis Funch 05.02.2020
Fungerer helt efter hensigten. Robust indpakning
forarbejdning
features
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
A
TS cable seen as shorted by default
AstronautDown 08.10.2021
I would easily give this product 5 stars but there's a built-in manufacturing issue that is baffling. If you test a TS 1/4" cable (i.e. an unbalanced instrument cable) it will show it as shorted because the 1/4" in/out expects a TRS (balanced) cable. This seems like a super-easy hardware fix with a simple selector on the unit. The documentation bldly claims the unit supports TS cables(!) which is technically true as long as you Pavlov yourself into accepting your perfectly good cables been shown as faulty. If you ask me, I find this tough to swallow, especially when 90% of the cables I bought it to test are 1/4" TS ones.
forarbejdning
features
17
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
PK
good product
Piotr Krupa 27.11.2018
Very good product, especially for the prise. Checking TR plugs is a bit tricky. 3/1 fault should be read as 'pass' , not mentioned in the manual.
forarbejdning
features
5
0
Anmeld bedømmelse

Anmeld bedømmelse