Til sidens indhold

Loudspeaker

  • Developed for modelling amps
  • Size: 12"
  • Impedance: 8 Ohm
  • Frequency response: 60 - 20,000 Hz
  • Magnet type: Ceramic
  • Rated power: 200 W RMS
  • Sensitivity: 97 dB
  • Voice coil: 2"
  • Suitable for a cut-out diameter of 283 mm
  • Weight: 4.1 kg
  • Fås siden December 2018
  • Artikelnummer 445132
  • salgsenhed 1 stk
  • Impedance 8 Ohms
  • Size of the speaker 12"
  • Power 200 W
  • Load Capacity 200 W
1.290 kr
Alle priser inkl. moms
på lager
1

31 Kundebedømmelser

4.6 / 5

lyd

forarbejdning

24 Anmeldelser

CB
Great FRFR solution
Christian Boddum 02.11.2020
Hi! I was looking for a FRFR solution for my Helix floor model, both for acoustic sounds and use of amps with IRs. This would make my FOH signal and amp levels match. Since I already had 2 BOSS Katana 112 mk. 1s, I opted for getting two of these speakers. This is a great affordable solution. I have plenty of power from the Katanas, and a very good portable stereo setup. I'm looking forward to trying it out live, but so far I'm confident that it will work with no issues. The matching of line/amp levels is just so nice. I have a set of Dynaudio LYD48 to do finetuning of presets, and then I double check on the combos, and it's so nice that they match quite close. Highly recommended :-) P.s. I run the amp via return only and skip the preamps, though for acoustic guitar it still works, and great too ;-)
lyd
forarbejdning
1
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
t
works great in a Harley Benton 1x12 cab
thrakor 19.03.2020
This is a full range speaker in the 12" guitar speaker format. So far I have replaced a Vintage 30 in my Harley Benton cabinet with this. My setup is a Line 6 helix into power amp, into this cab. I now use IRs on the helix and it sounds great - that is, it sounds similar to how it sounded before, going through studio monitors.

It comes in a sturdy double cardboard box - there's not much else to say about that. There are no accessories or anything else for this, it's just a speaker.

In terms of the sound characteristics, There's a lot of low end to my ears, however nothing that can't be EQ'd to taste, this might be inherent to this speaker or maybe my presets were bass-heavy before. So be prepared to tweak a little bit, but I think this is expected for any new setup.
lyd
forarbejdning
9
1
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
F
I should not have waited
Funkaloo 28.01.2022
I’ve never been a fan of digital modeling. But I love music technology. I’ve been playing guitar for 45 years. But I struggle to get a sound out of a model or that I liked for just playing. Not in a recording context. This thing is perfect. I put it in an oversized Peavey cab It makes a huge difference. I still prefer my tube amps for playing live. But when that’s not possible or not easy this is a great option.
lyd
forarbejdning
2
1
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
RH
Great for modellers
Rost Hariton 16.04.2021
I was looking for a speaker for modellers and plugins, this one is perfect for that. Just make sure you have a good POWER amp, so that your modeller/preamp/plugin can drive it, otherwise sound will be too quiet.
It's a great alternative to monitors or PA systems as you can fit it in a standard 1x12 guitar cabinet, or make your own cab, just like me.
lyd
forarbejdning
2
0
Anmeld bedømmelse

Anmeld bedømmelse