Dietrich Parts String Butler V3 BK

Start 360°

Vis oversættelse

Hardware to improve the tuning stability of electric guitars and steel-string guitars

Designed for guitars with 3L / 3R headstock machine head configuration
Adjusts the position of the A, D, G, B strings to correct the string routing through the nut slots , thus preventing the guitar strings from getting stuck
Greatly improves the tuning stability of your guitar and increases the sustain
Keeps the tuning of the strings even during very intense guitar playing (also copes with extreme bends)
Fast and easy installation
Version V3 with minimum post distance 35 mm / maximum post distance 58 mm
Colour: Black

Note: Not compatible with machine heads with bushings

30 dages-Money Back garanti

Fås siden Februar 2018
Artikelnummer 432425
salgsenhed 1 stk

298 kr

Alle priser inkl. moms

Salgsrang

i Hjælpemidler

Kunder som så på dette produkt købte dette

Dietrich Parts String Butler V3 Full Black

319 kr

købt

Dietrich Parts String Butler V2 BK

298 kr

købt

Dietrich Parts String Butler V2 Full Black

319 kr

købt

Dietrich Parts String Butler V1 Full Black

298 kr

92 Kundebedømmelser

5 75 Kunder 4 13 Kunder 3 4 Kunder 2 0 Kunder 1 0 Kunder

4.8 / 5

forarbejdning

Retningslinjer for anmeldelser

68 Anmeldelser

More or less fixes the tuning instability

Daniel Kjr 09.07.2024

While I am still confused why the tuning instability of the guitars hasn't been fixed by now, this is a handy fix for it that is easily installed and doesn't stick out too much on the head.

I've been playing with it the past 5 days and it seemingly has fixed the Les Paul shapes instability so far.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Genius product

Simon Klevin 11.07.2021

This thing is a great addition to any Les Paul. The tuning stability is improved a lot, and if you pick the right colours for your guitar (mine was black and chrome) it looks pretty stylish too!

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Saved my ES 355

HKHKHK 16.02.2020

I have a beautiful but difficult ES355, the difficulty being the (not uncommon) lack of tuning stability of the G and D strings, particularly under bending.

I played the guitar in the shop a couple of times before buying it, but I think that since I didn't own it at the time I was a bit gentle with the bends and didn't strum so hard, so the problem only became apparent after I got the guitar home. I was pretty crushed. I'm not an advanced enough player to "play around" the tuning issues and it was distracting me.

The String Butler is amazing. By straightening the 4 inner string pulls, the tuning is much better. Gibson necks still have a fairly sharp break, but if you are only noticing the tuning problems in the D and G, it's ikely the angled pull rather than the break that's causing the problem.

I do have a slight reservation with covering over part of the beautiful mother of pearl inlay on the 355 headstock, but knowing my 355 is now as stable as my Fender is a wonderful result.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Saving your Gibson!

Plexi's & gibsons 29.11.2018

If you have a Gibson and you like to do a ton of bends this thing is a lifesaver!

Pros:
It gives your strings a straight string pull and also fixes the headstock angle slightly. I use it on a Gibson SG and the thing stays in tune for days now!

It's easy to install if you have the right tuners (with screw in bushings).

Not a permanent mod.

Cons:
The look is a little weird at first. But if you like your Gibson to stay in tune and you've got a good lubricated nut, locking tuners. This is the only thing left to do!

You'll need a Gibson with tuners with screw in bushings (Grovers, new style klusons,..). Classic klusons with push in bushings will not allow you to install this unless you screw it in.

Conclusion:
If you can dig the look and want your Gibson to stay more in tune this works great! Easy to install and play more!

Anmeld bedømmelse

Læs alle anmeldelser

Dietrich Parts String Butler V3 BK

Hardware to improve the tuning stability of electric guitars and steel-string guitars

Hardware til at forbedre stemningsstabiliteten af elektriske guitarer og stålstrengsguitarer

Kunder som så på dette produkt købte dette

92 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

68 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Dietrich Parts String Butler V3 BK

Hardware to improve the tuning stability of electric guitars and steel-string guitars

Hardware til at forbedre stemningsstabiliteten af elektriske guitarer og stålstrengsguitarer

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

92 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

68 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator