DiMarzio EP1201PP

Start 360°

Vis oversættelse

Push Pull Poti

With a long axis, suitable for single cut models
500 kOhm
On / off switching function
Thread Length: 10 mm
Overall length: 20 mm
With two nuts and washers

Fås siden Juli 2005
Artikelnummer 183554
salgsenhed 1 stk
Design Push Pull/Push Push
Resistance Value 500 kOhms
Thread Length in mm 20,0 mm
Tandem Poti No
Push/Push Push/Pull
Solderless No
shaft type grooved

98 kr

Alle priser inkl. moms

Salgsrang

i Potentiometre

Kunder som så på dette produkt købte dette

Allparts CTS 500K Audio Taper Pot

75 kr

købt

DiMarzio EP1201 Custom Taper Poti 500K

68 kr

købt

Allparts Push/Push Poti 500K

144 kr

købt

TAD CTS 500K Std. Spl. P/P VAT Pot

90 kr

267 Kundebedømmelser

5 193 Kunder 4 40 Kunder 3 14 Kunder 2 10 Kunder 1 10 Kunder

4.5 / 5

forarbejdning

Retningslinjer for anmeldelser

116 Anmeldelser

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

5_gadalaiks 03.04.2022

Easy to install and works as it should.
However, I didn’t check the dimensions of this pot, and had to extend mounting hole in the guitar. And you might want to be careful soldering ground wire to the pot. While soldering, I might have damaged the pot and now it can be turned in never ending circle (it still works though)

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Smooth, fast and reliable.

jorgemosquerad 25.06.2021

If you are looking for smooth and fast operation, firm switching, no noise and no loose signal, DiMarzio pots will please you beyond expectations.
I used two on my guitar, a master vol with phase shifting and a tone one with Parallel/series switch. They couldn't work any better, and I consider myself hard to please. I never like anything.
I've had it worst installing other push/pulls in the past, but these DiMarzio were a walk in the park. Although I admit that bigger soldering points would be more confortable.
I will always recommend these pots.
They have nothing to envy CTS or others.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Nice Feel

Briano 04.12.2013

I used this pot for the "push pull" feature. I was able to split my humbuckers to single coil when the knob was pulled out. It worked great. A really nice feel of torque to it when turning the shaft, and firm soft but solid push and pull action. Very durable. NOTE 500k for humbuckers 250k for single coils.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Nothing to complain about

Paramite 03.12.2022

These potentiometer aren't abundant, and this is my first one, so i won't compare it to anything. I haven't done the something either, so I don't know if the design is any bad. What I can say for sure, that this thing works perfectly. Sturdy, no cracking or additional noise. I'm using it for about 4 years and nothing has changed, even though our kids like to fiddling with it as well. If you need a switchable potentiometer, don't look any further.

Anmeld bedømmelse

Læs alle anmeldelser

DiMarzio EP1201PP

Push Pull Poti

Push Pull Poti

Kunder som så på dette produkt købte dette

267 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

116 Anmeldelser

Smart Navigator

Serveret med kærlighed!

DiMarzio EP1201PP

Push Pull Poti

Push Pull Poti

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

267 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

116 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator