EarthQuaker Devices Scrolls Bass Odyssey

Effect Pedal for Electric Guitar

• Drive, EQ and cab simulator
• Audio tool for bass
• Enables the recreation of a wide variety of bass and amplifier combinations
• Powerful drive channel modelled on classic valve amplifiers
• High-quality EQ channel with active audiophile tone control options
• Quick access via the “Deep”, “Process” and “Bright” push-button switches
• Integrated effects loop
• Genuine relay-based bypass circuit
• Active buffered parallel output
• XLR output including analogue speaker simulation
• Suitable for “ampless” setups, where you can play directly into the mixing desk or audio interface
• EQ control “Level” (output volume)
• 'Vari' EQ control (boosts or cuts the selected frequency)
• 'Vari-Freq' EQ control (frequency control 20 – 10,000 Hz)
• EQ controls: Treble, Bass, Middle
• EQ “Deep” switch for boosting at 80 Hz
• EQ “Process” switch: attenuation of the lower midrange
• EQ “Bright” switch for boosting at 5,000 Hz
• Drive control “Level” output volume control
• The “Blend” control on the Drive channel mixes the unprocessed signal with the signal from the Drive channel
• Drive control “Bandwidth” control determines where the clipping is most pronounced
• Drive control “Tone” low-pass filter
• The Drive footswitch activates the Drive channel (featuring Flexi-Switch technology (Latch / Momentary mode))
• The EQ footswitch activates the EQ channel
• Input and output: 6.3 mm jack
• Direct output with speaker simulation: XLR
• Effects loop: 6.35 mm input and output
• Buffered parallel output: outputs the unprocessed signal to external devices (amp, DI box, tuner)
• Status: LEDs (EQ and drive)
• Power supply via a 9 V DC mains adapter (not included, 2.1 x 5.5 mm barrel connector, centre negative)
• Current consumption: 70 mA
• Dimensions (L x W x H): 121 x 114 x 57 mm
• Weight: 526 g
• Made in USA