Gibson PMMH-015

()

Start 360°

Vis oversættelse

Guitar Machine Heads

Original Modern Nickel
Metal buttons (Grover)
Set of 3 left and 3 right machine heads

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden Februar 2002
Artikelnummer 151549
salgsenhed 1 stk
Colour Nickel
Locking No
Design Modern

509 kr

Alle priser inkl. moms

158

Salgsrang

i 3L/3R-guitarmekanik

Kunder som så på dette produkt købte dette

Gotoh SD90-SL MG-T Locking 3L/3R N

418 kr

købt

Gotoh SG301-04 MG-T Locking 3L/3R C

158 Kundebedømmelser

5 126 Kunder 4 27 Kunder 3 4 Kunder 2 1 Kunde 1 0 Kunder

4.8 / 5

forarbejdning

Retningslinjer for anmeldelser

74 Anmeldelser

Perfect tune'o'matic replacement

Jørg 04.12.2017

I found the Tune'o'matic on my Gibson to be rather unstable, didn't stay in tune for long durations where as my cheap Harley Benton LP's had no such issues.
So I ended up replacing it with these machine heads and never look back.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Good looking machine heads

Algirdas 21.05.2013

These are certainly one of the better tuning machines. They turn smoothly and don't have much wobble. They're made by Grover, presumably in Korea, and will retrofit Grover Rotomatics without drilling any additional holes. However, build quality could be improved as there are casting marks on the housings and the plating isn't perfect. They're good tuners for the price but if you're searching for the perfect tuning machines, I would suggest taking a look at Schaller instead. They make a version that looks the same and is available with similar tulip-shaped buttons. They are smoother to turn, have less wobble and the plating is of a much higher standard.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

James777 18.06.2018

Much better than the stock machine heads on my 2007 Gibson Les Paul Classic. Feel great and I love how the nickel finish ages.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Almost painless Les Paul replacements

Marmaduke 10.12.2013

I couldn't find clear info about machine head sizes and guitar hole sizes so I took a bit of a guess on these Grovers for my 1979 Les Paul Standard. I had to do a very small amount of filing inside one or two of the old holes and with a rubber mallet tapped them in OK. They are snug and work really well... and look just like the original machines.

Anmeld bedømmelse

Læs alle anmeldelser

Gibson PMMH-015

Guitar Machine Heads

Guitarmekanikere

Kunder som så på dette produkt købte dette

158 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

74 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Gibson PMMH-015

Guitar Machine Heads

Guitarmekanikere

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

158 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

74 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator