Til sidens indhold

Harley Benton Custom Line Thunder 99

4.4 ud af 5 stjerner fra 129 kundebedømmelser

Guitar Power Amplifier in Pedal Format

  • Compact power amp pedal for electric guitar
  • For direct connection to any preamp, pedal or effects unit
  • Power: 2 x 50W to 4 ohms
  • For 4 - 16 ohm speakers
  • Master volume controller
  • 2 Inputs (L / R): 2x 6.35 mm jack
  • Aux input: 3.5 mm stereo jack with LED
  • 2 Speaker outputs (L / R): 6.35 mm jack
  • Headphone output: 3.5 mm mini jack
  • Dimensions: 124 x 74 x 59 mm
  • Includes 24 V / 5 A power supply
  • Fås siden Maj 2019
  • Artikelnummer 451331
  • salgsenhed 1 stk
759 kr
Alle priser inkl. moms
på lager
1

129 Kundebedømmelser

4.4 / 5

betjening

features

lyd

forarbejdning

105 Anmeldelser

J
Better than you'd think
Jitterbug 17.02.2020
It's a totally blank slate, but it works really well. It needs pedals to really sound good but you'd probably put those pedals in front of an expensive amp aswell ;)
This is more than just a "replacement"-amp to keep in your gigbag. I use this as my main amp (and a mute switch on my pedalboard) and I can get some great jazz chorusy sounds with the right pedals switched on.
features
forarbejdning
lyd
betjening
0
0
Anmeld bedømmelse

Anmeld bedømmelse

V
Billig stueforstærker
Vonlopster 23.01.2023
Købte den for at have en forstærker til at øve derhjemme. Virker perfekt. God lyd, lav buzz. Anbefalet!
features
forarbejdning
lyd
betjening
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
B
Problems running in stereo over a stereo/mono cab
Boef 01.01.2021
This little amp is quite a wonder. It has 2x50 watt (by 4 ohm) independent stereo channels and gives enough clean volume for a club gig at 8 ohms too. The sound is excellent and in comparison to my Pearce Gr2 the sound of the thunder 99 is a bit thicker. I had a problem running it in stereo over a 2x10 (16 ohm speakers) cab that was wired for stereo and mono use. Solution is to use a breakjack on both the (-) and the (+) of the cab, when using it in stereo. A cab wired for stereo and mono, uses a breakjack on one of the speaker (+) inputs to allow for stereo use when a second jack is inserted and mono use when this second jack is removed. On standard stereo/mono cabs like Marshall both the (-) of the speakers are connected together. This gave the problem that the Thunder 99 stuttered and gave no signal when using my tremolo/panning effect which threw the signal back and forth from left to right. I don't know why this problem only happened with the stereo tremolo/panning effect and not with any other stereo effects from the same pedal. So this problem can be solved by using a breakjack connection not only for the (+) but also a breakjack connection on the (-). I discovered this problem because it didn't occur when I used 2 separate cabs. So it's a brilliant and loud power amp with a great sound. I think a lot of Kemper users will be happy with the Thunder 99.
features
forarbejdning
lyd
betjening
15
5
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
S
Great idea...but
SlackboyJim 03.10.2019
I got excited about this product early on in 2019, and ordered it for arrival in July. Product arrived ok, and worked a charm with Mooer compact preamps meaning I had a HUGE amount of tonal and volume choices from a very compact pedal board. The Thunder was loud enough in to 2 x 12 to keep up with drummers in bands (match that impedance, though!!) and was "clean" and uncolouring. Even the size of the volume meant I could gently ride my level when the band got excited. BUT....
After 1 month of use I found I was getting electric shocks from the unit. I isolated it from the rest of my gear and so ONLY the pedal and PSU were in use, and sure enough 5-8V were measured. I could "solve this" by plugging in to an earthed product but that isn't right. Unit is being returned and I'll update you when I have news...
features
forarbejdning
lyd
betjening
46
5
Anmeld bedømmelse

Anmeld bedømmelse