Til sidens indhold

File Set

  • For the individual design of saddles and bridges
  • Incl. stainless steel groove files and stone block files
  • Slot files sizes: 0.4 mm, 0.5 mm, 0.6 mm, 2 x 0.7 mm, 0.8 mm, 0.9 mm, 2 x 1.0 mm, 1.1 mm, 1.2 mm, 1.4 mm, and 1.6 mm
  • Block file in size 100 x 12 x 12 mm
  • Fås siden Juni 2023
  • Artikelnummer 558767
  • salgsenhed 1 stk
77 kr
Alle priser inkl. moms
på lager
1

292 Kundebedømmelser

3.8 / 5

forarbejdning

173 Anmeldelser

R
Prøvetid.
Rasmussch 17.09.2025
Kunne være fantastisk at varen kom med en returlabel og en prøvetid på en uge. Man køber varen og betaler. Når den er modtaget har man en uge til at prøve. Hvis den ikke lever op til forventningerne sender man den tilbage og får penge retur. Er den ikke i samme stand som da den blev afsendt betragtes dette som varen er købt. Dette tror jeg er den største udfordring ved at handle ved thomann i forhold til butikker
forarbejdning
1
0
Anmeld bedømmelse

Anmeld bedømmelse

i
Fint sted at starte
irok 15.09.2023
Bruger dem til små justeringer og øvelse i opsætning af guitar/bas som begynder på området.
1
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
T
Great product, but be careful
TomGoss 26.07.2023
These little round files are fantastic for smoothing and shaping slots, but they are easy to bend if you are too forceful, but they can also cut into the nut surprisingly fast as well so it's easy to go too far if you aren't careful.
They are great if you work gently and take time to stop and check your progress.
I don't think I'd try to cut a new nut with these as they are too flimsy, but for smoothing and shaping existing slots and sharp edges they are excellent.
For the price this is a no-brainer addition to your workshop.
14
3
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
A
Does not work!!!
Aurius 14.09.2025
It is a single use disposable item, that will not even work! I needed to deepen existing nut slots on my ukulele for about 0.75 mm. I spent more than 4 hours filing! And I only managed to deepen ~0.5 mm before the files became as smooth as oiled baby skin. Spent more then one hour for each nut slot! And used up 7 or 8 files. I have read all the reviews and was expecting them to be flimsy. And yes they were very soft and bendy. But I was expecting them to be harder then the GraphTech Nubone XB nut, otherwise they serve no purpose. My nut is white, but because all the metal from the file is shredding off the slots became black and you can not completely clean it off after filing. Not sure how it i will affect strings from all the metal dust inside.

Also the stone block is neither straight not flat, it is just useless!
forarbejdning
3
0
Anmeld bedømmelse

Anmeld bedømmelse