Harley Benton Parts JB Style Pickguard Black

()

Vis oversættelse

Pickguard for JB Style Basses

3-ply
10 Holes
Thickness: 2.3 mm

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden August 2014
Artikelnummer 338214
salgsenhed 1 stk
Colour Black

68 kr

Alle priser inkl. moms

Salgsrang

i J-style bas slagplader

Kunder som så på dette produkt købte dette

Harley Benton Parts-JB Pearl White Pickguard

191 kr

købt

Harley Benton Parts JB TO Pickguard J-Bass

153 kr

købt

Fender JPickguard 10hole 3ply BK

454 kr

købt

dAndrea J-Bass PIckguard DPP JB BWB SS

227 kr

125 Kundebedømmelser

5 58 Kunder 4 25 Kunder 3 16 Kunder 2 10 Kunder 1 16 Kunder

3.8 / 5

forarbejdning

Retningslinjer for anmeldelser

78 Anmeldelser

As it should be

JesperBKK 28.12.2020

What is there to say? It's a pickguard.

I bought one, because I re-sprayed my bass, and the original white pickguard didn't really look good on it anymore.

It fits perfectly on my Harley Benton bass, and it comes with that plastic protection that everybody loves to peel off :)

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Works

Lado 11.08.2017

It fit ok and looks good on My Harley Benton J-Bass...
Only two holes were a bit of...
I don't know if this pickguard will fit a fender or oher brands...
A bit glossy.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Good quality but check your sizing

Anonym 27.02.2015

I bought this to replace a red tort pickguard that came with a Harley Benton Jazz Bass. The pickguard itself is well machined with smooth edges and bevelled screw holes that show off the three ply (Black/White/Black) material.

My only warning is that neither the neck pickup hole and the neck pocket cut out do not line up with the Harley Benton bass I ordered at the same time. The screw holes also appear to be in slightly different positions (It would be useful if Thomann could provide a diagram with dimensions to allow customers to check before ordering).

Thomann were very good when I contacted them, and they have arranged a return at their expense for a refund.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Well made, great value

JonnyPf 12.12.2017

This is a well made and good value for money pickguard that fits both my Harley Benton Fretless JB and my Marcus Miller V7 bass.
The fit is 'nearly' perfect on the HB Fretless Jazz bass, whilst the fit on the Sire V7 is not quite perfect but in my opinion good enough.
The HB Fretless does not have any screw holes in the body, so you may want to make some, personally I have just used double sided tape, as the fit is snug enough.
Some of the holes on the Sire V7 do align with the Pickguard, some do not - I elected to screw some in and use double sided tape for any other areas. Again, the fit is snug and secure.
The Pickguard is well made and has a quality look.
Just an edit to say that the pickguard has warped slightly just above the front pickup position. This was probably down to me not drilling a new hole and screwing the pickguard down into place. Just thought I would mention that the guard can possible warp if only using double sided tape.

Anmeld bedømmelse

Læs alle anmeldelser

Harley Benton Parts JB Style Pickguard Black

Pickguard for JB Style Basses

Slagplade til JB-basser

Kunder som så på dette produkt købte dette

125 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

78 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Harley Benton Parts JB Style Pickguard Black

Pickguard for JB Style Basses

Slagplade til JB-basser

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

125 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

78 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator