Höfner 63 H61/73B

()

Start 360°

Vis oversættelse

Machine Head Set for Beatles Bass

Original mechanism set for the Beatles Bass Model 63
Shaft length to hole: 22.5 mm
Shaft width: 6 mm
Nickel

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden Januar 2004
Artikelnummer 166048
salgsenhed 1 stk
Colour Nickel

1.135 kr

Alle priser inkl. moms

Salgsrang

i 2L/2R-basmekanik

64 Kundebedømmelser

5 43 Kunder 4 14 Kunder 3 4 Kunder 2 1 Kunde 1 2 Kunder

4.5 / 5

forarbejdning

Retningslinjer for anmeldelser

33 Anmeldelser

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

NIce replacement for cheaper Hofner basses

ClubMan 31.03.2016

I ordered these tuning machines to replace the stock tuners on a Hofner Ignition Club Bass, since the original felt really cheap and clumsy. These are supposed to be the ones that go on the expensive German Hofner basses, and even they still look like guitar tuners with a plain open mechanism, they are well made and feel smooth and steady.
It's worth noting that they come with bushings and mounting screws, as a set (I was not sure because it is not mentioned in the product description).
Keep in mind though that it is not a direct replacement for an Ignition bass: some minor work has to be done in order to accomodate these tuners. The bushings are slightly larger in diameter, so the holes on the Ignition headstock need to be widened (about 1mm). Then, one of the mounting screws fits one of the existing holes, but for the other screw it's necessary to drill a new guide hole.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Beatles Bass Upgrade

Anonym 06.04.2015

I have fitted these to my Ignition Beatles Bass as a direct replacement for the ones it comes installed with.
As other reviewers state you will have to drill one pilot hole per machine head and half of the unused hole from the previous machine heads will be showing.
I have chosen to leave this hole unfilled and unpainted as you cannot see it unless you know its there or you are scrutinising it very closely.
You do not need to install the machine head peg guides (metal sleeves) that come with these but if you want to fit them you will need to drill the peg guide holes out to fit them (more work than is necessary in my view).
They are an excellent replacement being manufactured of higher quality metals that are not loose like the original machine heads.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Perfect and authentic quality

Cees 18.05.2019

I used the Höfner 63 H61/73B tuners for a Hofner "1963" bass-guitar restoration project and they where a perfect match in style (looked the same and had the same measurements). Also the quality is sublime, they used some good materials for the knobs and gears and it runs smoothley. And the most important thing:"they stay perfectly in tune"

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Original is original

Vlajsa 17.11.2020

This tuning pegs are of course original and very good manufactured, I have bought for my Hofner 66 501/1, they are amazing.

Anmeld bedømmelse

Læs alle anmeldelser

Höfner 63 H61/73B

Machine Head Set for Beatles Bass

Mekaniksæt til Beatles-bas

64 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

33 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Höfner 63 H61/73B

Machine Head Set for Beatles Bass

Mekaniksæt til Beatles-bas

Tilbehør og matchende produkter

64 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

33 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator