Med vores cookies ønsker vi at tilbyde dig den bedst mulige shoppingoplevelse med alt, hvad der hører til. Dette inkluderer for eksempel passende tilbud, personlige annoncer og gemte præferencer. Hvis du er okay med dette, skal du blot acceptere brugen af cookies til præferencer, statistik og markedsføring ved at klikke på "I orden!" (vis alle). Du kan til enhver tid trække dit samtykke tilbage via cookie-indstillingerne (her)
For HDMI, Ethernet, bidirectional RS-232, IR signals and PoE
The unit has inputs for HDMI, Ethernet, RS-232 and IR and converts these signals into an HDBaseT TP signal and transmits them via CAT copper cable to the receiver, which converts the signal back into the output formats
Transmission range up to 100 m, with lower resolutions even beyond this range
HDMI signal extension: HDMI 2.0 and HDCP 2.2 compliant signal, with Deep Colour, x.v.Color, Lip Sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, CEC, Full HD, 2K, 4K and 3D
EDID and CEC signals pass between source and display
Intelligent EDID processing, editing and pass-through algorithms enable plug and play operation with HDMI sources and displays
Multi-channel audio extension: up to 32 channels of uncompressed digital stereo signals for studio-quality surround sound
Ethernet extension: Ethernet interface data flows in both directions to allow LAN communication and device control up to 100 Mbps
RS-232 bidirectional extension: serial interface data flows in both directions to allow data transfer and device control
Bidirectional IR extension: IR interface data flows in both directions to allow remote control of peripherals
Includes power supply unit and mounting brackets
Technical data:
Input: 1x HDMI
Output: 1x HDBT TP with RJ-45 socket
Data ports: 1x IR with 3.5 mm jack / 1x RS-232 with DB9 jack for serial extension and firmware upgrades / 1x RJ-45 for Ethernet (LAN extension, 10Base-T/100BaseTx)
Extension: HDBaseT 1.0 compliant / Up to 100 m with 4K @60 Hz (4:2:0) / Up to 130 m with Full HD (1080p @60 Hz 36 bpp) / Up to 180 m in HDBaseT Ultra Mode and Full HD (1080p @60 Hz 24 bpp) / (Values apply when using Kramer HDBaseT cables).
Video: Up to 10.2 Gbps bandwidth (3.4 Gbps per graphics channel) / Up to 4K UHD @60 Hz (4:2:0) 24 bpp resolution / HDMI 2.0 and HDCP 2.2 compliant.
Ethernet extension: Up to 100 Mbps bandwidth
RS-232 extension: 300 to 115,200 bit/s
RS-232 control: 115,200 bit/s
Cooling: Convection ventilation
Power supply: 48 V DC 280 mA
Dimensions: 18.8 x 11.5 x 2.5 cm
Weight: 0.4 kg
4K 60 UHD TP-sender (HDBaseT 2.0)
Til HDMI, Ethernet, tovejs RS-232, IR-signaler og PoE
Enheden har indgange til HDMI, Ethernet, RS-232 og IR og konverterer disse signaler til et HDBaseT TP-signal og sender dem via CAT kobberkabel til modtageren, som konverterer signalet tilbage til outputformaterne
Transmissionsområde op til 100 m, med lavere opløsninger selv ud over dette område
HDMI-signaludvidelse: HDMI 2.0 og HDCP 2.2-kompatibelt signal, med Deep Colour, xvColor, Lip Sync, HDMI ukomprimerede lydkanaler, Dolby TrueHD, DTS-HD, CEC, Full HD, 2K, 4K og 3D
EDID- og CEC-signaler passerer mellem kilde og display
Intelligent EDID-behandling, redigering og pass-through-algoritmer muliggør plug and play-drift med HDMI-kilder og skærme
Multi-channel audio extension: op til 32 kanaler med ukomprimerede digitale stereosignaler for surround-lyd i studiekvalitet
Ethernet-udvidelse: Ethernet-grænsefladedata flyder i begge retninger for at tillade LAN-kommunikation og enhedskontrol op til 100 Mbps
RS-232 tovejsudvidelse: seriel interface-data strømmer i begge retninger for at tillade dataoverførsel og enhedskontrol
Tovejs IR-udvidelse: IR-grænsefladedata strømmer i begge retninger for at tillade fjernstyring af periferiudstyr
Inkluderer strømforsyningsenhed og monteringsbeslag
Tekniske data:
Indgang: 1x HDMI
Udgang: 1x HDBT TP med RJ-45 fatning
Dataporte: 1x IR med 3,5 mm jackstik / 1x RS-232 med DB9 jackstik til seriel udvidelse og firmwareopgraderinger / 1x RJ-45 til Ethernet (LAN udvidelse, 10Base-T/100BaseTx)
Udvidelse: HDBaseT 1.0 kompatibel / Op til 100 m med 4K @60 Hz (4:2:0) / Op til 130 m med Full HD (1080p @60 Hz 36 bpp) / Op til 180 m i HDBaseT Ultra Mode og Full HD (1080p @60 Hz 24 bpp) / (Værdier gælder ved brug af Kramer HDBaseT-kabler).
Video: Op til 10,2 Gbps båndbredde (3,4 Gbps pr. grafikkanal) / Op til 4K UHD @60 Hz (4:2:0) 24 bpp opløsning / HDMI 2.0 og HDCP 2.2 kompatibel.