Micro-Mesh Soft Pads Set

I have used them to polish frets and they won't leave a deep scratch on the fretboard.

But remember they're still abrasive, and the lowest grit will scratch your fretboard so cover up with tape or protective metal.

After the final polish, my frets were so shiny and so buttery smooth to play on.

I even had a burr inside a cheap tuner gear that was scratching and catching on the plate it was sitting on. After polishing the burr on the micro mesh pads, the tuner turned smoothly and stopped catching on the metal plate.

These Micro Mesh Soft Pads are excellent when polishing frets, giving them a nice, clear mirror-like shine.
If you've done the job well, polishing the frets with 320, 400, 600, 800, 1000 and 1200 grit sandpaper, you only need to use the 1500 and 1800 to complete the process. That will produce a mirror-like reflection.
After that, the frets are a dream to bend and slide on!

I also use these when I make a Bone Nut from scratch, and I need to do the final polish on the top. Makes the nut look like a piece of glass.

Jeg bruger disse til at at fjerne fret sprout når det trænger, starter med den laveste kornstørrelse og arbejder mig op til den sidste.
Man skal være omhyggelig for ikke at ridse træet men følger man kornstørrelsen op så bliver resultatet godt.

De har en meget kraftig lugt. Anbefaler du åbner pakken og ligger dem i garagen, skuret eller lignene så de kan lufte ud.

jeg bruger det til mine træ mods(e cig)
det giver den lækreste overflade på mit træ,nok det bedste micro mesh
jeg har brugt, sliber det med korn 4000 og op til 12000, man for den flotteste overflad man kan tænke sig, og så afslutter jeg med voks så man kan spejle sig i det ,, top karakter her fra

Har brugt dem til noget overflade behandling på en guitar og var meget glad for disse