Milab VIP-60
Milab VIP-60; condenser microphone; hand-built in Sweden; switchable polar patterns: cardioid, wide cardioid, hypercardioid, omnidirectional and figure-8; switchable filters at 200Hz and 500Hz; switchable pre-attenuation pads: -10dB and -20dB; frequency range: 20Hz - 20kHz; sensitivity at 1kHz: 14 mV/Pa (± 1dB); max. SPL (1% THD at 1kHz): 118dB; max. SPL with -10dB pad: 128dB; max. SPL with -20dB pad: 138dB; self-noise (A-weighted): 14dB; output impedance: < 200Ohms; minimum load impedance: 1kOhm; requires 48V phantom power; 3-pin XLR connector; incl. Rycote InVision USM shock mount; dimensions (W x D x L): 47 x 50 x 170mm; weight: 400g
-
Fås siden Juli 2026
-
Artikelnummer 649682
-
salgsenhed 1 stk
