Shure A55M

()

Start 360°

Vis oversættelse

Shock Mount

Suitable for Shure models PG48 / 57 / 58, SM48 / 57 / 58, Beta 57 / 58
Colour: Black
Inner diameter: 24 - 25 mm
Delivery is without a threaded adapter (Article Nr: 104870)

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden Marts 2009
Artikelnummer 224774
salgsenhed 1 stk
Component type Pivot Mount

290 kr

Alle priser inkl. moms

Salgsrang

i Holdere

Kunder som så på dette produkt købte dette

Shure A25D Microphone Clamp

91 Kundebedømmelser

5 64 Kunder 4 21 Kunder 3 6 Kunder 2 0 Kunder 1 0 Kunder

4.6 / 5

forarbejdning

Retningslinjer for anmeldelser

46 Anmeldelser

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Not the best

LOUKL 17.06.2020

It is not the best I could imagine. Sliding the mic in and out is it not so obvious. It tends to stick to the inner rubber. Test the shock attenuation and I could not find any real benefit.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Isolates the mic from vibration very well

BernieW 15.12.2022

These mounts really do isolate the mics from vibration effectively, as well as a suspension mount or maybe better, but the problem is that the mic may sag, so you need to find a way to balance it in the mount. This is the one the President uses for speaking into a pair of SM57's with the A57 AWS so if it's good enough for that job it's good enough for us.
It fits an M88TG nicely but the barrel of an M160 is too small (or you can wrap some tape around it). It's designed to fit SM and Beta 57's and 58's and similar. If you fit it at the balance point and clamp the cable to support the back of the mic then it will stay in place but it has a tendency to sag.
But it really does isolate the mic from vibrations very well. If you thump the table or stand with this mic on it using this mount then little of the noise will be heard in the mic.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Very good quality shock mount

Bill Alpha 18.06.2021

Using it on my SM58 and it's perfect, you just slip in the microphone and done.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Nick L 02.03.2015

I bought this with the SM57 mic - and glad I did. Easy to use and does a good job in isolating table/stand shocks. It's a simple and well constructed extra that's worth the investment as it takes out one of the many extraneous factors that can adversely affect ones recording.

Anmeld bedømmelse

Læs alle anmeldelser

Shure A55M

Shock Mount

Støddæmper

Kunder som så på dette produkt købte dette

91 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

46 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Shure A55M

Shock Mount

Støddæmper

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

91 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

46 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator