K&M Thumbwheel Alu BK

Vis oversættelse

Knurled Thumbwheel

Locking nut knurled for microphone stands
Material: Aluminium
Colour: Black

Fås siden December 2003
Artikelnummer 166589
salgsenhed 1 stk
Type Nut
fitted for Microphone Stand

6,70 kr

Alle priser inkl. moms

Salgsrang

i Reservedele til Stativer

Kunder som så på dette produkt købte dette

K&M 03-21-160-55 Rubber Plate

7,10 kr

købt

K&M Capstan Head Black

305 Kundebedømmelser

5 279 Kunder 4 21 Kunder 3 5 Kunder 2 0 Kunder 1 0 Kunder

4.9 / 5

forarbejdning

Retningslinjer for anmeldelser

86 Anmeldelser

Det er, hvad det er

Frederik D. Larsen 31.05.2023

Hvad kan man sige? Det er, hvad det er.

Jeg har en mikrofonholder, hvor denne dims var skruet af og forsvundet ifm. noget oprydning. Jeg tænkte, at den så var tabt, og at jeg måtte leve uden, men ville dog lige se, om de solgte den som reservedel – og det gør de! Det er fedt, at K&M har så mange reservedele til salg som de har.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

It's a lock-nut !

MickD 18.07.2016

What can I say ? Nice ! Well made ! Does what it says ! Scores 10 out of 10. I like the finish - nice matt black !
I find these are essential on my boom arms, not only to stop the arm falling through the clamp, but also to lock down any connecting microphone clamps. Other information you may find useful - the diameter is 22.35mm and the thickness is 3.5mm.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

They're magic!

0-VU 11.07.2025

Kind of.

I mean, it's a lock nut. It works.

However, no matter how carefully one screws them down onto the threaded tip of a stand or boom arm, before packing the stands into their flight cases, some of them will always magically work loose and fall off in transit even if the stands are stored vertically in the cases and cases transported upright! Magic, right?

Or maybe just physics but that doesn't make it less irritating when the stand you just carried half way across the venue is missing its lock nut and the upper tube has dropped through into the base!

Not only that but where do they go? A few drop into the case but most vanish without trace! They're probably swarming with the lost socks from the washing machine, Sharpies left unattended at gigs and XLR adaptors that never reappear after being "lent" to the stage crew!

So it's good that K&M sell them separately.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Does what a thumbwheel ought to do...

DrCheese 14.01.2021

Threads onto 3/8" microphone stand threads - the narrower standard favoured outside of the US. Mainly use on telescopic boom arms to prevent the final section sliding inside of the previous section. Other uses can be found: I use a couple of them to fix mic clips in place on 3/8" threaded bars for a Jecklin disc. Keep a few spare for odd jobs. Well made and good value.

Anmeld bedømmelse

Læs alle anmeldelser

K&M Thumbwheel Alu BK

Knurled Thumbwheel

Riflet fingerhjul

Kunder som så på dette produkt købte dette

305 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

86 Anmeldelser

Smart Navigator

Serveret med kærlighed!

K&M Thumbwheel Alu BK

Knurled Thumbwheel

Riflet fingerhjul

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

305 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

86 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator