Tama CB90FH Felt Beater Head

()

Vis oversættelse

Beater Head

For Iron Cobra bass drum pedals
Surface: Felt

Fås siden Februar 2001
Artikelnummer 146286
salgsenhed 1 stk
Type Beater

138 kr

Alle priser inkl. moms

Salgsrang

i Tilbehør til Fodpedaler

Kunder som så på dette produkt købte dette

Tama CB90F Felt Beater

195 kr

købt

Tama CB90RH Rubber Beater Head

137 kr

købt

Tama CB900PS Power-Strike Beater

209 kr

købt

Tama HP900-7H Heavy Tension Spring

34 kr

125 Kundebedømmelser

5 84 Kunder 4 30 Kunder 3 6 Kunder 2 3 Kunder 1 2 Kunder

4.5 / 5

forarbejdning

Retningslinjer for anmeldelser

32 Anmeldelser

Godt lille stepup

Duen 13.04.2020

Godt hvis man lige vil gøre lidt ekstra ud af sin stortrommelyd uden at smide mange penge i det.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Perfect beater for my purpose

Johan SpinOff 28.12.2019

I bought this as a replacement beater head for my Tama Speedcobra. The beater head that was supplied with it was too hard for my taste.

With this beater head attached my kick drum just sounds the way I want it.
It's a very easy replacement. Angle can be adjusted, ... It packs more features than I would ever have expected this kind of product could have or need!

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Simple replacement for worn-out Iron Cobra beater heads.

jonathanhoey 23.06.2014

I bought a pair of these beater heads to replace the worn-out original beater heads that came with my Iron Cobras. (I had played almost 100 gigs with them, as well as hundreds of hours of rehearsals, so I have nothing bad to say about their longevity!)

Fitting them is very straightforward, requiring only a drum key. Loosen the single bolt, turn the head through 180 degrees (so the felt side faces the back) and lift off. Pop the new one on (also upside down and backwards), rotate until it faces the front, and tighten the bolt. It takes seconds.

Note that this package does not include the shafts - this item is the beater *head* only. So it's only suitable as a replacement if you already have Iron Cobra beaters with the cylindrical T-bar at the top. If you're replacing a different model of beater, then the item you need is the CB90F, which includes the shaft.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

The felt does ware away

Anonym 17.09.2015

This is a great beater head, and is the beater head of my choice, as it feels great to play with, gives a good response from my pedal and a nice sound from the bass drum. I have never had any trouble with the connection of this beater head, it fits to my iron cobra pedal as it should and has never fallen out of place.
The only trouble i have found with this beater head, is only to be expected, but I am now finding myself having to replace the head only after a short amount of time, as the felt wares away sometimes leaving sharp bits of glue that then can damage the bass drum head, if it is not changed in time.

Anmeld bedømmelse

Læs alle anmeldelser

Tama CB90FH Felt Beater Head

Beater Head

Piskehoved

Kunder som så på dette produkt købte dette

125 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

32 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Tama CB90FH Felt Beater Head

Beater Head

Piskehoved

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

125 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

32 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator