Til sidens indhold

Daisy Chain Power Distribution Cables

  • For up to 5 Effects
  • Fås siden Maj 2006
  • Artikelnummer 194240
  • salgsenhed 1 stk
44 kr
Alle priser inkl. moms
på lager
1

1280 Kundebedømmelser

4.5 / 5

forarbejdning

441 Anmeldelser

PD
Billig løsning
Per Duun 15.11.2016
Jeg har købt en 2.000 mA strømforsyning - hos Thomann selvfølgelig - og med dette kabel kan jeg forsyne hele mit pedalboards pedaler.

Jeg har ingen problemer med støj. Hvis jeg fik det ville jeg købe en Harley Benton Powerplant til lige under 300 kr.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
A
When you just have to share power for many pedals
Anonym 01.12.2014
The cable is ok quality. Does it's job.
Sometimes there are not enough sockets in powersource, so have to share power.
However you should also consider some side effects.
Some pedals bleed effect a litlle thru power cable.. For exampe you could hear a tiny pit of flanger going on even tho that pedal is not on, but power-cable-connceted analog delay pedal is on. That is one reason people like to use isolated powersource outputs or batteries.
Then pedals require different amount of power. If you have chained pedals requiring lots of power and your powersource output can't put it up, your pedals might light up like its on, but there is no sound.
forarbejdning
1
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
0
Very good cable.
0209 19.02.2014
With this cable up to five pedals can be used with one power supply. With two of these in series up to nine pedals and so on. But make sure your power supply has enough power for so many pedals. Just add the mA specifications on your pedals and compare with the one on the power supply. When using a good power supply, the sound is not affected, i.e. there is no increase of hum or buzz etc.
Since there is no need for batteries anymore, this item saves money. Moreover this is very helpful, to build a well organized pedal board. The cable is long enough, such that the pedals don't have to be to close and you can get rid of some big power supplies and extension blocks, blocking space on the board.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
HP
It works, but questionable construction and material choices
Han-earl Park 18.08.2025
It does what it's supposed to do (i.e. transmit low-current, low-voltage DC power over short distances).

Even at this low price, however, I think the construction and material choices leave a lot to be desired. Rather than using individually insulated two-conductor cable, the DC5 uses a single-core shielded cable. Not a bad choice in itself, but this prticular cable has a very, very thin core (with maybe 8 copper strands), and the core is connected to the negative side (assuming Boss-style center negative wiring).

As I said, it does work, but I'd recommend trying something else first.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse