Til sidens indhold

Voodoo Lab Pedal Power Cable PPBAR-R

4.8 ud af 5 stjerner fra 372 kundebedømmelser

Power Cable For Effects Pedal

  • Power supply: 2.1 mm angle coaxial
  • Pedal connector: 2.1mm Angle Coaxial
  • Polarity: Standard (center minus)
  • Length: 46 cm
  • Fås siden August 2008
  • Artikelnummer 215514
  • salgsenhed 1 stk
44 kr
Alle priser inkl. moms
på lager
1

372 Kundebedømmelser

4.8 / 5

forarbejdning

98 Anmeldelser

A
Superior quality
AATK 26.09.2025
Simply the best quality available
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
D
Great cables for good price
DonSchlup 26.07.2019
While building my first pedalboard with a Pedaltrain Metro 16, I ran into the annoying problem of fitting the power supply beneath the darned thing. Using my Harley Benton Power Plant ISO-1, I've found that the supplied cables either don't fit underneath the board, or take up quite a lot of room while connecting with the pedal themselves, due to the connector being straight on one end, and angled on the other.

With these, everything fits perfectly, and it's looking pretty good!

That, and there was no aditional noise that I noticed when switching cables.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
w
Hope this will last...so far, so good
wgen 21.11.2018
Bought this pedal power cable because I had to replace not just one, but two of the ones that came with my Carl Martin power supply. These were really pieces of junk, still not sure how it happened because I respect all of my gear, but they broke just where there is the connection with the power supply itself.
I bought this Voodoo Lab one because of the quality associated with the name for what concerns power supplies solutions...So far, it does its job like it should without problems.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
DM
Exactly...
David M. 3021 13.06.2015
....what was needed. I bought these to extend my board and using the Voodoo Lab 4x4 these are exactly what I needed.

I'm considering using the 2 cable splitter to run a tuner and compressor from one port but I guess that will be next time. In an ideal world I would have liked to get the straight angle to right angle cable but these didn't seem to be available, I'm not really sure why, but these work just fine and do still fit underneath my pedaltrain 2.

It would be excellent to also be able to get a shorter length of cable to avoid having to tie up all the cables underneath but again this is a minor issue.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse