Voodoo Lab Voltage Doubling Cable PPY

Vis oversættelse

Voltage Doubler Cable

Pedals with higher voltage requirements can use this voltage doubler cable to combine two isolated power supply multi-outputs and thus provide 18 V or 24 V
Suitable for various MXR Dunlop Fulltone and Keeley pedals
Power supply: 2 x 2.1 mm coaxial
Pedal connector: 2.1mm coaxial
Polarity: Standard (center minus)
Length: 46 cm

30 dages-Money Back garanti

Fås siden April 2008
Artikelnummer 207270
salgsenhed 1 stk

82 kr

Alle priser inkl. moms

202

Salgsrang

i Tilbehør til guitareffekter

182 Kundebedømmelser

5 138 Kunder 4 27 Kunder 3 14 Kunder 2 1 Kunde 1 2 Kunder

4.6 / 5

forarbejdning

Retningslinjer for anmeldelser

75 Anmeldelser

Works as advertised.

Lyngshede 05.09.2019

Small and simple cable that saved my behind in a pedalboard emergency. Works as advertised and of good quality.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Ha ha det virker,

BorisSGD 03.10.2019

Genialt kabel til at køre 18 volt på en pedal.

Bruger det til en MXR Flanger og det virker rigtig fint.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

A useful tool

Anonym 30.01.2015

I purchased this product to allow a Decibel 11 Hot Stone Deluxe to power a Pigtronix Echolution 2 delay pedal.

The pedal required 18v whereas the power supply was only able to provide 9v.
Despite being made by Voodoo Lab this adapter will work with any power supply which uses the standard Boss style connectors.

It has worked flawlessly in operation and appears to be made to a high standard. I have had no issues with noise etc.

Though it is advertised for use with pedals such as the OCD I would recommend it more for pedals like the Echolution 2 which require both 18v and a significant amount of current.

There are adapters from other manufacturers which will only take up a single output from your power supply and can output 18v however these are typically limited to 30mA and so can only be used with low current pedals.

This cable can also be used to provide 24v by combining two 12v outputs although it won't provide the reverse polarity that some pedals of this voltage require.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Does what it needs to do

SJS 14.02.2021

I bought this cable as to be able to supply 18v to my Fulltone Supa-Trem2 V2 which can function at this voltage in order to provide more headroom. It works flawlessly.

Pros: High quality as usual in Voodoo Labs products
Cons; None

Anmeld bedømmelse

Læs alle anmeldelser

Voodoo Lab Voltage Doubling Cable PPY

Voltage Doubler Cable

Spændingsfordoblerkabel

182 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

75 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Voodoo Lab Voltage Doubling Cable PPY

Voltage Doubler Cable

Spændingsfordoblerkabel

Tilbehør og matchende produkter

182 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

75 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator