Adam Hall STRS6U Rack Stand 6U

Vis oversættelse

Rack Stand 6U

Black
Threads for M5 screws
12 Screws included
Weight: 1.6 kg

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden Februar 2012
Artikelnummer 277570
salgsenhed 1 stk
Type Tabletop Stand
Height 310 mm

Vis varianter af dette produkt

152

Adam Hall STRS6U Rack Stand 6U

Adam Hall STRS6U Rack Stand 6U Rack Stand 6U * Black * Threads for M5 screws * 12 Screws included * Weight: 1.6 kg...

113 kr

til produktet

Adam Hall Rack Stand 12

Adam Hall Rack Stand 12 19" Rack Stand with 12 U * Material: Powder-coated steel * Thread suitable for M5 screws * 6-way...

263 kr

til produktet

Adam Hall Rack Stand 06

Adam Hall Rack Stand 06 19" Rack Stand with 6 U * Material: Powder-coated steel * Thread suitable for M5 screws * 6-way ...

241 kr

til produktet

301

Millenium RW-2001

Millenium RW-2001 19" Carriage with Rollers * Solid 12U construction with adjustable 8U bottom * Load bearing capacity u...

577 kr

til produktet

187

Millenium Rackstand 12U

Millenium Rack Stand 12U Rack Stand * Size: 12 U * Free-standing open rack * Material: Steel * Thread for M5 screws * De...

119 kr

til produktet

182

Millenium Rackstand 6U

Millenium Rackstand 6U Rack Stand 6 U * Thread for M5 screws * Dimensions (W x H x D): 48 x 29.5 x 35.5 cm * Including 1...

96 kr

til produktet

125

Millenium Rackstand 4U

Millenium Rackstand 4U Rack Stand 4 U * Thread for M5 screws * Dimensions without screws (W x H x D): 515 x 225 x 358 mm...

80 kr

til produktet

175

Adam Hall STRS12U Rack Stand 12U

Adam Hall STRS12U Rack Stand 12U Rack Stand * 12 U * Threads for M5 screws * 24 Screws included * Weight: 2.2 kg * Colou...

158 kr

til produktet

113 kr

Alle priser inkl. moms

186

Salgsrang

i Stativer til studier

152 Kundebedømmelser

5 64 Kunder 4 48 Kunder 3 30 Kunder 2 6 Kunder 1 4 Kunder

4.1 / 5

stabilitet

forarbejdning

Retningslinjer for anmeldelser

79 Anmeldelser

Bad angle = 4U effectively

Marc the Darc 11.08.2017

For the most part this is every bit as good as could be expected.

I only have 2 qualms about this product.
One being the minor thing that only 12 screws are included, so in effect you can only mount 3 units without acquiring more screws elsewhere.
And then the major issue: The angle of the mountings is "less than optimum", so unless the bottom 2-3U are used for a extremely short unit, it won't fit! And I seriously doubt any unit is short enough to actually fit the bottom U.
So this should effectively be considered a 4U rack.

Beyond that it does what it's supposed to, and reckon it'll last plenty of years.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Good for the price

Claus_a 17.10.2019

Nice rack, I use it for my compressor and eurorack for now. Might be difficult to fit something in the bottom unit unless it's eurorack or something not so deep.

Anmeld bedømmelse

Alsidigt stativ

Anonym 31.03.2016

Et godt og billigt stativ. Jeg valgte at modde mit stativ, ved at skære benene kortere, så det passer bedre til min bordplade.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

6U Rack stand that is really only a 4U

Gerard1742 14.09.2015

This stand is a decent stand. It is tough and seems to be built well. The metal seems of good quality for sure. However, the stand has a big down side in regards to its function. There is a support strut that goes across the top of the stand. Well this pretty much rules out the chance of installing any 1u rack device. You just cannot avoid this strut. So your robbed of basically the top 1u slot. The next thing that robs you of another 1u is the fact that the stand is too low to allow the bottom 1U space to be filled. As others have said this stand is more like a 4U.

I guess it's down to poor design that two 1U slots are made redundant. So be careful in your choice of stand. Luckily there was no great urgency for me to have 6U, I just chose this stand for the extra space available if I need it perhaps in the future.

One other thing, which is not a big deal, but it would have saved some time. There is no guide on how to setup the stand. It is straight forward but a simple diagram would have helped. Must things come with set up diagrams, it's not a big ask to have had one supplied. I had to go onto the website again to see what the stand looked like so I didn't install the strut and the rear bar in opposite positions.

Performance wise the stand holds up well. It seems quite sturdy and so long as it's not abused it will hold your rack gear no problem. Obviously it will not take a huge 4U rack PA as this would just be too heavy. But it will hold your 1 U preamps and EQs and noise gates with no issues and it sits very stable on a flat surface such as a desk or cabinet.

Anmeld bedømmelse

Læs alle anmeldelser

Adam Hall STRS6U Rack Stand 6U

Rack Stand 6U

Rackstander 6U

152 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

79 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Adam Hall STRS6U Rack Stand 6U

Rack Stand 6U

Rackstander 6U

Tilbehør og matchende produkter

152 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

79 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator