Til sidens indhold

Allparts EP-0285-000 250k Push/Pull Pot

4.3 ud af 5 stjerner fra 36 kundebedømmelser

Audio Taper Push/Pull Potentiometer

  • Logarithmic 250 kΩ potentiometer
  • Push/Pull switching function
  • Knurled shaft with standard length
  • Thread height: 9 mm
  • Thread diameter: 9.4 mm
  • Fås siden Juni 2016
  • Artikelnummer 388510
  • salgsenhed 1 stk
  • Design Audio Taper
  • Resistance Value 250 kOhms
  • Characteristic Curve Logarithmic
  • Thread Length in mm 10,0 mm
  • Tandem Poti No
  • Push/Push Push/Pull
  • Solderless No
  • shaft type grooved
90 kr
Alle priser inkl. moms
på lager
1

36 Kundebedømmelser

4.3 / 5

forarbejdning

20 Anmeldelser

google translate gb
Der opstod en fejl. Prøv igen senere.
S
Good pot
StephanPK 21.01.2022
Relative small, so a bit tricky to solder, but on the other hand, does not take a lot of space inside the cavity of the guitar.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
D
Well made but hard to use.
DrKevGuitar 18.01.2018
Build quality is perfectly fine. The threaded shaft is too long for mounting on pickguards without using 3 mm of washers to shim it down. Once installed, the pot works great.

The switch doesn't feel stiff but I have difficulty pulling it up with a plastic strat-style knob; I have to slide my finger nail under the edge of the knob to get enough grip. On stage? Forget it! Perhaps with a tele-style knurled metal knob it'll be easier, but that's not what I want on my guitar.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
E4
Ean 45c 21.02.2021
Great for the price. Nice and smooth operation
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
-
-Benni- 25.08.2023
I bought this pot new and it arrived with a scratchy action and the push-pull operation is stiffer than the 500k pots that I purchased from Allparts.

Something that is annoying is that this potentiometer only comes with 1 nut, so you cannot height adjust like you can with many other pots. This feels like a miserly cost saving. It would also be great if the grounding tab had a hole through it, to allow a more secure soldering point for ground wires.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse