Til sidens indhold

A/D Converter

  • Expander with 8 analogue line inputs to expand synthesisers and instruments
  • For producers and sound engineers who need additional analogue inputs for external equipment
  • 24-bit AKM AD converter with up to 96kHz sampling rate
  • Front panel controls with access to channel selection and link function
  • Desktop design
  • Eight analogue inputs: 6.3 mm jack
  • One WordClock input (BNC)
  • Two ADAT optical outputs, support SMUX
  • Mains connection
  • Sturdy 1U half-rack housing
  • Rack installation possible (up to two devices next to each other)
  • Dimensions (W x D x H): 221 x 216 x 48 mm
  • Weight: 1.41 kg
  • Included software: Analog Lab Intro, Pre 1973, Pre V76, Filter Mini, Chorus JUN-6, Comp FET-76, Delay TAPE-201, Rev PLATE-140, Phaser BI-TRON, Pre TridA, Comp DIODE-609
  • Includes power supply and mounting kit for two AudioFuse X8 units
  • Fås siden August 2024
  • Artikelnummer 594249
  • salgsenhed 1 stk
  • Amount Of Channels 8
  • AD Conversion Yes
  • DA Conversion No
  • Max. Resolution Rate in Bits 24 bit
  • Max. Sampling Rate in kHz 96 kHz
  • S/PDIF Connecor No
  • AES/EBU Connector No
  • ADAT Yes
  • Word clock Yes
  • Number of analog inputs 8
  • Number of Analog Outputs 0
  • Headphone connection No
  • Special Features 8 analog Inputs, ADAT Outputs (Ch 1-8), Word Clock Input, Software Bundle
2.222 kr
Alle priser inkl. moms
på lager
1

17 Kundebedømmelser

4.9 / 5

betjening

features

lyd

forarbejdning

14 Anmeldelser

google translate gb
Der opstod en fejl. Prøv igen senere.
M
Perfect parter for 16Rig
MCDDV 11.11.2026
I own two of these (and two X8 outs). These are fantastic units and, when used with the 16Rig, integrate seamlessly with both the hardware and the software.

Because they are optical, you can actually use them to connect gear that is not close to your audio interface by using longer optical ranges (though I opted for longer audio cables and keep them close to the Audio Interface).

Sound is good, and the units are solid. If you have any combination of X8 In or Outs, you can screw them together to get a 1U-sized unit that can sit on top of a 16Rig or go in a rack.

A couple of notes:

1. They don't come with optical cables, so you need to purchase some. One per unit

2. If you are using one X8 In and/or one X8 Out, you do not need word clock or BNC to run them with your 16Rig; they will work with the clock sent via ADAT over the optical connection.

3. If you have more than two of any of the X8s, you will need to purchase 75 Ohm BNC Cables and T-Connectors and use word clock. Thomann has them, but they are pricey. They must be 75 Ohm, though; 50 Ohm does not work.

4. You can run 2 ins and 2 outs of the 16Rig at up to 48Khz for an outrageous amount of ins and outs in total. Enough to run a studio full of synths and drum machines without ever worrying.

Fantastic units. My only comment is that I wish they would bundle them with optical cables by default.
betjening
features
forarbejdning
lyd
0
0
Anmeld bedømmelse

Anmeld bedømmelse