Behringer Eurorack Ears Model D 70HP

()

Vis oversættelse

19" Rack Bracket

For 70 HP Behringer Eurorack cases
Suitable for Behringer Model D

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden Januar 2020
Artikelnummer 477972
salgsenhed 1 stk
Description Rack Mount

111 kr

Alle priser inkl. moms

116

Salgsrang

i Andet tilbehør til synthesizere

Kunder som så på dette produkt købte dette

38%

købt

Behringer Eurorack Ears NEUTRON 80HP

Roadworx Synthesizer Stand

222 kr

købt

thingyfab Stand Duo Behringer Neutron

333 kr

75 Kundebedømmelser

5 73 Kunder 4 1 Kunde 3 1 Kunde 2 0 Kunder 1 0 Kunder

5 / 5

forarbejdning

Retningslinjer for anmeldelser

40 Anmeldelser

Essential with every desktop synth from Behringer

JoeD 15.07.2021

Unless you have an ulimited amout of desktop space, the need to mount your synths in a rack will arise. If you use 19" racks, this little kit does the job and does it well. The finish is somewhat raw, but hey, it's just s slab of black aluminium. And I will make sure to buy a set for each coming desktop synth from Behringer in the future.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Super at få den i 19" rack.

Claus Kaasgaard 28.02.2021

Lidt dyrt. Burde have været med i kassen...... Men very nice.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Brilliant solution at a great price.

Paul599 17.05.2020

I've been waiting for these for a while now. Basically, it turns your 70HP Behringer synth (Cat, Model D, Wasp) into a 3U rack synth. I don't know why Thomann refer these as 'Eurorack ears'.

The design is simple - remove two screws from each end cheek on the sides of your synth, add the rack ears and replace the screws. Simple. Well, until you try to mount the thing in your rack. The screw holes are oval, although on my synth there wasn't enough lateral room on the inside of the screwhole. Whether that't the rack ears or my Model D is unknown. It's not the rack though, as it happily contains lots of other 19" rack equipment without issue. I managed to get it in, but a slight adjustment of the size or location of the screwholes in the rack ears would have been nice.

There's also a fundamental design flaw with this, in that the power switch is on the back. So once it's mounted, it's impossible to get to. I leave mine on as it's powered by my power distrubition unit, but adding a front mounted switch would have been useful.

The material is hard and heavy, probably steel - they feel sturdy enough. Anyway, it serves it's purpose - but Behringer missed a trick not offering a front mounted power switch. There's loads of space for it too.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Perfect accessory to rack your Model D

Lex C. 16.01.2022

There were many options to arranging my Model D in the studio but when space for new gear forced me to re arrange my setup, racking the Model D to my sidecar 19” rack with my hardware samplers and synths made perfect sense and these rack ears were the solution.

Anmeld bedømmelse

Læs alle anmeldelser

Behringer Eurorack Ears Model D 70HP

19" Rack Bracket

19" rackbeslag

Kunder som så på dette produkt købte dette

75 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

40 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Behringer Eurorack Ears Model D 70HP

19" Rack Bracket

19" rackbeslag

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

75 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

40 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator