Blackmagic Design HyperDeck Studio HD Mi B-Stock
Broadcast Deck
- For recording and playback of H.264, ProRes or DNxHD files in SD/HD formats up to 1080p/60 on SD/UHS-II cards or external USB drives
- 3G-SDI inputs and outputs
- HDMI output
- Dual SD card slots allow card swapping while recording is in progress
- Integrated clock and time code generators
- Front panel controls
- Acts like a webcam when connected to a computer via the USB port
- Can be used with any video software
Connections:
- 1 SDI video input
- 1 SDI video output
- SDI rates: 270 Mbit, 1.5 G, 3 G
- 1 HDMI video output
- Time code connections: 1 BNC input, 1 BNC output
- Reference connections: 1 BNC input, 1 BNC output
- Tri-sync or black burst
- SDI audio inputs and outputs: 16 embedded audio channels
- HDMI audio outputs: 8 embedded audio channels
- Remote control: 1 RS-422 input
- Computer interface: 1 USB-C-3.0 (up to 5 Gb/s) for recording to external drives, webcam output, software configuration and updates
- Video sampling frequency: 4:2:2 YUV
- Colour accuracy: 10 bit
- Colour spaces: Rec. 601, Rec. 709, Rec. 2020
- HDR support: Hybrid Log-Gamma, ST2084 300, ST2084 500, ST2084 800, ST2084 1000, ST2084 2000, ST2084 4000, ST2084
- Multirate support: automatic detection of SD and HD
- 2 SD card slots
- 1 USB-C 3.0 expansion port for external recording in SD, HD and 2K DCI
- Media type: UHS-I and UHS-II SD cards
- Storage media format: formats media in ExFAT (Windows/Mac) or HFS+ (Mac) file systems
- Supported codecs: ProRes HQ QuickTime, ProRes 422 QuickTime, ProRes LT QuickTime, ProRes Proxy QuickTime for all formats up to 1080p/60.
- DNxHD 220x, DNxHD 220x MXF, DNxHD 145, DNxHD 145 MXF, DNxHD 45, DNxHD 45 MXF for 720p and 1080p HD formats up to 60 fps
- H.264 SDI 4:2:2 10 bit, H.264 High 4:2:0 8 bit, H.264 Medium 4:2:0 8 bit and H.264 Low 4:2:0 8 bit for all progressive scan formats up to 1080p/60
- Built-in control panel: 8 buttons for transport and unit control with seek controller and 2.2" colour display
- External control: RS-422 deck control, SDI start/stop, timecode run
- Blackmagic HyperDeck Ethernet Protocol included Supports remote file uploads via FTP
- Software included: Blackmagic OS, Blackmagic HyperDeck Setup
- Product software upgrades loaded at start-up or via Blackmagic
- HyperDeck Setup via USB port
- Compatible operating systems: Mac Catalina 10.15, Mac Big Sur 11.1 or higher, Windows 10, 64 bit
- 1 integrated AC power supply for 100-240 V, 50/60 Hz
- 1x 12V DC power supply unit with 5.5mm barrel connector for external power supply or battery operation ( power cable not included)
- Dimensions: 140 x 177 x 44.2 mm (1 height unit, one third rack width)
- Weight: 820 g
-
Fås siden September 2021
-
Artikelnummer 530353
-
salgsenhed 1 stk
