Til sidens indhold

Flyht Pro Case Behringer Wing Compact

4.5 ud af 5 stjerner fra 11 kundebedømmelser

Transport and Mixer Flight Case

  • Custom-made for Behringer Wing Compact
  • Material: Coated 6 mm Multiplex
  • Aluminium edge: 30 x 30 mm
  • Foam padding
  • Four butterfly latches
  • Rounded steel ball corners
  • Cable channel on the back
  • Unit can be operated in the case
  • Four folding handles
  • Exterior dimensions (W x D x H): 645 x 510 x 325 mm
  • Weight: 11.5 kg
  • Colour: Black
  • FĂĄs siden Juli 2025
  • Artikelnummer 608180
  • salgsenhed 1 stk
  • made for Behringer
  • Type Case
  • Material 6mm plywood
  • Wheels No
  • Dockhouse No
  • Colour Black
  • Weight 11,5 kg
  • External Width 645 mm
  • External Depth 510 mm
  • External Height 325 mm
1.359 kr
Alle priser inkl. moms
pĂĄ lager
1

11 Kundebedømmelser

4.5 / 5

stabilitet

hĂĄndtering

forarbejdning

7 Anmeldelser

google translate gb
Der opstod en fejl. Prøv igen senere.
la
Low price = medium quality, and a nice HACK to the case...
live audio tech 03.11.2025
The case itself is good quality, it's the foam fitting why i give it a bad quality rating.

There is no foam that puches the wrist rest in it's place, so the console is a little loose in the case. Good for personal use but not for touring.

There is also a lot of space lost in the bottom part of the case, it is filled with ISOMO, not foam.

In every console we stock some accesoires, such as a talkback and some cables. to stock it, i cut a hole in foam of the bottom part of the case. and glued some thin parts of foam in that hole to hide the ISOMO and to make it clean soft look. now i can stock a microphone+cable, Mini jack,usb and power cable in it.
stabilitet
hĂĄndtering
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
A
Better than expected based on the price!
ANGR77 02.10.2025
Actually very solid and fits the Wing Compact just perfectly.
stabilitet
hĂĄndtering
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
S
Needs Moulded Foam in Lid
SoundandMusicCo.ie 12.11.2025
Lovely looking case. The base fits the console well & has a cut out to allow access to headphone socket. There is enough room at the back of the case under the wing lip to fit mains cable. BUT the lid only has one piece of flat foam in the roof and a single piece around the edges, which is too thick to go over the console, you have to squeeze lid on with first fitting.
The top of the console where the screen is will be protected by the lid itself but as other reviewers have pointed out, there is a good chance that the bottom of the desk where the arm rest is will move inside. the front edge should have been fitted with a 2-3" piece of hard foam to lock this into position. I may try this myself. Overall its a good case!
0
0
Anmeld bedømmelse

Anmeld bedømmelse