Til sidens indhold

Case

  • 3 U
  • 19" Rackmounts, front and back
  • Installation depth (up to the lid at the back): 311 mm
  • Heavy duty butterfly latches
  • Very light construction
  • 197 x 546 x 445 mm
  • Weight 4.54 kg
  • Optional replacement screws available separately, Article Nr 449210
  • Fås siden September 2008
  • Artikelnummer 212524
  • salgsenhed 1 stk
  • Formfactor 19"
  • Construction Type Double-Door
  • Vertical Height Units 3 U
  • Internal Depht [mm] 310 mm
  • Horizontal Height Units 0 U
  • with display stand No
  • Rack rail at the back Yes
  • Service flap No
  • With Wheels No
  • Trolley No
  • Shock Mount No
  • Clasps Butterfly
  • Material Plastic
  • Colour Black
  • External Width 546 mm
  • External Height [mm] 197 mm
  • External Depht [mm] 445 mm
  • Weight 4,5 kg
949 kr
Alle priser inkl. moms
på lager
1

286 Kundebedømmelser

4.4 / 5

stabilitet

håndtering

forarbejdning

154 Anmeldelser

google translate gb
Der opstod en fejl. Prøv igen senere.
K
Light, simple and relatively cheap.
Koesbeenian 10.11.2020
Light, simple and relatively cheap.
I don't want to carry 16mm plywood cases. This is good enough. And when I'm performing for 20.000 people I buy myself the plywood cases for someone else to carry.
stabilitet
håndtering
forarbejdning
5
2
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
m
great product
mibutzu 06.01.2019
absolutely love this case! quality built and sturdy. the handles are excellent and very carry-friendly. overall, a product I love to use.
stabilitet
håndtering
forarbejdning
1
1
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
H
Best case out ther.
Heaventeo 01.01.2019
it carries my VHT 2/90/2 Power Amplifier every night for many years.
No problems. Very light, very good protection.
stabilitet
håndtering
forarbejdning
1
1
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
A
Very cheaply made case but not cheap
Angelo16 05.07.2026
If your 3U unit has feet you have to be able to remove them cause the unit wont fit inside the case. The thread bara are attached to the frame with double sided tape and fell right off when i tried to screw the unit in the case. I had to glue the bars so I could screw the unit in the case. Very bad design !
stabilitet
håndtering
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse