Jaspers Holders 22B

()

Start 360°

Vis oversættelse

Holding arms for Jasper's keyboard stand

Length: 22 cm
Load capacity: up to 15 kg (extendable with shelf reinforcement up to 40 kg load capacity - not included)
With stoppers and two-part pipe clamps
Can be mounted anywhere without dismantling the stand
Colour: Black powder-coated

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden November 2019
Artikelnummer 478295
salgsenhed 1 stk
Type Of Keyboard Stand Holder
Colour Black

319 kr

Alle priser inkl. moms

Salgsrang

i Tilbehør til keyboardstativer

Kunder som så på dette produkt købte dette

Jaspers T-Fitting two-pieced

61 kr

58 Kundebedømmelser

5 50 Kunder 4 8 Kunder 3 0 Kunder 2 0 Kunder 1 0 Kunder

4.9 / 5

stabilitet

forarbejdning

Retningslinjer for anmeldelser

32 Anmeldelser

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Good quality, but a bit of a pain to assemble.

Alan796 28.03.2021

If you're just adding one or two of these, then fine, they are easy enough to assemble and install.

But if, like me, you have to do a bunch of them in a row (MoogerFooger FX pedals) then not only is it a real pain, but also it's very difficult to get them aligned properly.

I can't think of a better system, but it just seems like there should be one somehow. Like, once you've decided on the rotation position, you should be able to lock it, then once you've decided on the arm position, you should be able to lock that too. But instead there's a lot of to-and-fro adjustments. And then you tighten it all up and you discover it moved while you were tightening it and you have to do it all over again.

I guess that's the price you pay for the flexibility, but like I say ... I just have a brain itch that says there should be some easier way.

Still, once you get them finally in right, they do the job and I will buy more as the need arises.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Jaspers means quality

PositronAlpha 22.09.2020

I use these for a Novation Peak, and it works very well. Jasper holders are super-stable, yet very easy to adjust.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Easy to mount but hard to level

Arcadia 21.09.2020

The nice thing is that you don't have to take the stand apart to add these. The downside is that it's very hard to get the bars perfectly level with each other as you have to turn the bar sideways to access the tightening screw. Lots of trial and error is involved.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Right size

Thoughtful Amp 19.06.2020

.... perfect for small synths or drum machines or MIDI controllers. As with everything else, Jaspers makes a quality accessory to work with their whole system.

Anmeld bedømmelse

Læs alle anmeldelser

Jaspers Holders 22B

Holding arms for Jasper's keyboard stand

Holdearme til Jaspers keyboardstativ

Kunder som så på dette produkt købte dette

58 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

32 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Jaspers Holders 22B

Holding arms for Jasper's keyboard stand

Holdearme til Jaspers keyboardstativ

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

58 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

32 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator