Jaspers Holders 40B

()

Vis oversættelse

Holder

Length: 40 cm
Load capacity: Up to 15 kg (extendable with support reinforcement up to 40 kg load capacity - not included)
With stoppers and two-part pipe clamps
Can be mounted anywhere without dismantling the stand
Material: Powder-coated aluminium
Colour: Black
Quantity: 1 pair

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden Februar 2007
Artikelnummer 109395
salgsenhed 1 stk
Type Of Keyboard Stand Extension
Colour Black

325 kr

Alle priser inkl. moms

Salgsrang

i Tilbehør til keyboardstativer

Kunder som så på dette produkt købte dette

Jaspers T-Fitting two-pieced

61 kr

154 Kundebedømmelser

5 131 Kunder 4 18 Kunder 3 5 Kunder 2 0 Kunder 1 0 Kunder

4.8 / 5

stabilitet

forarbejdning

Retningslinjer for anmeldelser

68 Anmeldelser

Virkelig stabil!

Glenni 20.12.2022

Den er go’! Stabil! Anbefales

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Great product - but watch those hooks!

infindebula 16.09.2021

I feel confident these holders will support any keyboard up to about 25 pounds (about 10 kg) with no reinforcement.

The hooks on the end arrived a little loose on mine. No problem - just use an Allen key (not provided) to tighten them. They thread into a plastic insert which expands when tightened, to stay in place in the aluminum extrusion. I strongly recommend buyers check to make sure they are not loose. Just try to pull them out as hard as you can. If they move, push them back in and tighten.

Also, double-check the underside of your keyboard. On my Akai AX-60, the bottom is sloped toward the keyboard at the front, and the hooks are not long enough to safely prevent the keyboard from sliding off if it is sloped toward the player. The hooks are about 4-5 cm in length, but a length of 6.5 cm is required for the AX60. I also own a couple of older Korg keyboards with a similar slope on the underside, but I haven't tried them - I expect to encounter similar problems. For such keyboards, you must either set them up to be level, or replace the hooks - you could use wood, or aluminum bar stock (1/4" x 3/4") as I did.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Versatile and qualitative.

Magus 18.09.2017

Used to attach extra devices to the original keyboard holder.

Pros:
- Quality
- Lightness
- Easy mounting on the existing support, no need to disassemble it.

Cons:
- none

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Use up that unused space!

George5545 02.01.2014

My Jaspers Holder 40B came on time and well packaged. These things although overpriced are great for using up that unused space on your Jaspers keyboard stand. A word of advice, if you have your keyboard stand against a wall dont order this size for the top row as they will restrict how far you can tilt your equipment back. They are prefect for the other rows below but if your planning to use the holders on the top row it might (depending on the size of your keyboard) be better to get a set of slighting smaller Jaspers holders like the Jaspers Holder 30B or something.

Anmeld bedømmelse

Læs alle anmeldelser

Jaspers Holders 40B

Holder

Holder

Kunder som så på dette produkt købte dette

154 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

68 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Jaspers Holders 40B

Holder

Holder

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

154 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

68 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator