Neumann KH 120 II

Jeg købte to stk. KH 120 II med en MA 1 målemikrofon og dertilhørende softwarefunktion.

Jeg købte også to andre populære studiemonitorer (Kali og KRK) i tilsvarende størrelse men dog en billigere model for at sammenligne, da jeg var usikker på om merprisen for en Neumann kunne betale sig. Der er for mig ingen tvivl om at man her får nogle gode og fornuftige højttalere fra Neumann og jeg giver gerne merprisen for det ekstra man får i lyd og features.

Funktionen med at man kan få lyden kalibreret via målemikrofonen, så der korrigeres for det lokale man sidder i er nogen jeg sætter stor pris på. Jeg er også glad for, at den 8-bånds EQ der er indbygget kan tilpasses individuelt og forskellige presets kan gemmes og loades efter forgodtbefindende. Jeg har senere tilkøbt KH 750 DSP subwooferen, hvilket også muliggør gør dyb bas.

En detalje iørigt, som jeg synes er værd at nævne: Det ser ud til at elektronikken/printet/PCB er placeret "bag på højttaleren" (dvs. det er integreret i højttaleren, men uden for det kammer hvor højttalerenhederne sidder i). Det vil forventeligt give en længere levetid for højttaleren, da varme nu kan ventilere mere frit samt at elektronikpladen (PCB) og lodninger ikke bliver udsat for hårde vibrationer f.eks. når bassen spiller, hvilket er en stressfaktor der med tiden kan få nogle højttalere til at give en defekt.

Hvis jeg skal sætte fingeren på en lille negativ ting ved disse højttalere, så er det at knapperne (ikke tænd/sluk-knappen - den er fin) bagpå til div. indstillinger virker billige og ikke er særligt robuste. Det er dog ikke nogen man bruger hvis man konfigurerer dem via netværket - og det gør man jo, for det er her alle de smarte features ligger :)

Alt i alt er jeg positiv og tilfreds med disse højttalere og kan klart anbefale dem. Husk at bestille målemikrofonen MA 1 med ;)

I ordered these alongside the Genelec 8030s to compare. I have a small studio space, about 6x2m2. I sit about 90cm from the monitors, the studio is professionally treated and I used SoundID Reference software to calibrate both pairs of speakers in the space.

Initially, I was drawn to the Genelec's, because everything sounded so good through them. They have a lot of warmth and a great quality of cohesion to mixes. Elements just seemed to sit well together. The Neumann's I found a bit annoying and tiring in the beginning, especially something about the mids. However, after continued listening through multiple genres, I realized that I could hear SO much more detail with the Neumann's. They are transparent, they do not do you or your mixes any favors. When I didn't like listening to them, it's because a mix needed work. The Genelecs had more cushion for subpar mixes, which make them more pleasant to listen to, but not what I need in a reference monitor.

My reference software also shows that the Neumann's are much, much flatter in my space and need very little correction, whereas the Genelecs (though I have read they have a fairly flat frequency curve) needed a lot more adjustment from about 200-600hz and 2-3khz. This could be the way these speakers are responding to my specific room and their position, but the Neumann's did not have issues to be corrected here.

Both the Neumann's and Genelec's are robust and well-made. Both are outstanding options. For my needs, I decided to go with the Neumann's, as they are the most honest to my ears and that is what I am looking for. I expect that if you can make a mix sound full and vibrant on them, the mix will translate anywhere. They have a tight bass, never muddy in the mids, and the high mids and up are clear and transparent.

In the end, your decision should come down to your personal preference and what monitor works for your space and needs. Definitely audition both, if you have the chance!

It's good I waited so long before posting a review. I have had these for over a year now and both of them have failed within 3 months of each other. I have never experienced anything like it and don't believe in coincidences. I use top-of-the-line surge and overcurrent protection, in addition to voltage regulation and the wiring in my place is professionally done. The first one failed after spontaneously emitting a brief harsh transient. Next day it was just harsh noise after turning on and a red light indicating the on-board limiter was engaged. I RMA'd it under warranty and received a replacement, so thanks to Thomann for a good post purchase service. However, I had to go for a month without nearfield monitoring.

I noticed the second one failing after it began to smell like burning and then it turned the red light on and refused to play until power-cycled. Afterwards, I noticed the same smell again within 30 minutes and called it quits - I didn't want to risk a catastrophic failure nor my other gear being taken out as well. Now, again, I'm left with no monitoring.

I don't think it'd be helpful on my part to praise the sonic qualities, of which there are enough reviews out there - I don't care how good it sounds if it does not last. I expected years if not decades of life from such an established brand as Neumann, especially given the price tag.

And yeah, the back plate is consistently placed in a way that prevents you from easily selecting the bottom values of selector switches, so there's that. All 3 units have had this.