Schaller M6 135 Locking 3L/3R BC

()

Start 360°

Vis oversættelse

Clamping Machine Head Set for Electric Guitar

Precise, wear-free premium mechanisms
Small, lightweight design
Model: 3 Left/right
With Velvet-Tec and LX6-Lube technology
Very high quality surface finish due to improved manufacturing processes
Construction: Closed
Wings: M6 Metal large
Ratio: 1:18
Shaft length: 19.5 mm
Bore: 9.8 mm
Mounting: Screws & Locknut
Screw ear: 135°
Schaller article nr: 10020423.02.52
Finish: Black chrome-plated
Including: Fixing screws, banjo bolts and washers
Made in Germany

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden Januar 2003
Artikelnummer 159043
salgsenhed 1 stk
Colour Black
Locking Yes
Design Modern

1.050 kr

Alle priser inkl. moms

Salgsrang

i 3L/3R-guitarmekanik

Kunder som så på dette produkt købte dette

Gotoh SG381-07 MG-T Locking 3L/3R B

525 kr

købt

Grover 502BC Locking Rotomatics

1.099 kr

købt

Harley Benton Parts Locking Tuners 3R/3L BK

345 kr

købt

Gotoh SG381-01 MG-T Locking 3L/3R CB

599 kr

137 Kundebedømmelser

5 123 Kunder 4 9 Kunder 3 3 Kunder 2 1 Kunde 1 1 Kunde

4.8 / 5

forarbejdning

Retningslinjer for anmeldelser

79 Anmeldelser

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Quality upgrades for 3+3 headstock

Andy Fereday 11.11.2020

I got a set of these to go on a Peavey SC-2 which I'm using as a platform for upgrading. They fit the existing holes very well and were really straightforward to fit. I put them on at the same time as a String Butler (the V3 model) and didn't have any problems fitting both together.

Installing new strings was really easy and quick. I didn't wrap the strings round the posts at all, just threaded them through the post, tightened the locking screw on the back, trimmed the ends off and tuned up. I was a bit nervous about whether this would hold the strings tightly enough, especially after cutting the ends down so short. Have to say, they're holding absolutely fine.

Tuning stability is really good with these on. You'll need to allow strings to stretch for a couple of days but then they seem to hold tuning really well.

The only word of caution I have is that the black coating can be easy to scratch when you're installing the machine heads. What I found helped was using one of those spanners that fits over the nut completely (the sort that comes in Ikea kits).

Very happy with these machine heads. They feel like they're really good quality. They're not exactly stiff to tune but they don't have that loose feeling of the old tuners I had on the guitar.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

outstanding

rabid 14.12.2021

love the feel of these, and they look great.
Couldn't do without the locking tuners now lol

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Great tuners - but just watch out for the shortish capstan

Rick A 06.11.2022

These replaced very old Gotohs without any need for additional screw holes, which made life very easy. However what I had not realised is that the capstan height is shorter, leaving very little to rise above the headstock. I had a choice of either sending them back or reducing the thickness of the headstock and I did the latter, sanding about 2mm off the back of it so that when fitted the capstan holes were nicely positioned to take the strings. Quite obviously this would not have been an option for the majority of projects, so just check that capstan height before you order to make sure it is sufficient. If it is then you're good to go, if not I suggest looking elsewhere. Now they fit I am very happy with them.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Top notch quality tuner

TerryMcK 23.08.2013

These locking tuners appear to be made from brass but coated with a flawless black finish probably paint. They fit into a 10mm diameter hole with a washer and locknut showing on the face. They also are prevented from turning in the hole by a small screw into the wood of the headstock on the rear. Stringing a guitar is ultra quick now. You loosen the knurled clamp screw, push the string through the hole, tighten the clamp screw and tune the guitar. In practice this is no more than 3/4 of a turn. Then snip off the excess. Very neat, quick and tidy.

Anmeld bedømmelse

Læs alle anmeldelser

Schaller M6 135 Locking 3L/3R BC

Clamping Machine Head Set for Electric Guitar

Klemmemekaniksæt til elektrisk guitar

Kunder som så på dette produkt købte dette

137 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

79 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Schaller M6 135 Locking 3L/3R BC

Clamping Machine Head Set for Electric Guitar

Klemmemekaniksæt til elektrisk guitar

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

137 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

79 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator