Thon Rack Case 6U 12 RA

Start 360°

Vis oversættelse

19" Case

6 RU
Installation depth from rack rail: 12 cm
Ideal for installing 19" mixers, etc.
7 mm plywood
22 x 22 mm Aluminium edges
Small ball corners
Rubber feet
2 Drawbolts
1 Handle
Liftable continuously adjustable rack rail
Attachment material
Detachable lid
Exterior dimensions: 550 x 195 x 305 mm
Weight: 4.7 kg
Colour: Phenol brown
Set-up angle up to 24°
Made in Germany

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden Februar 2003
Artikelnummer 159995
salgsenhed 1 stk
Vertical HE 6 U
Colour Phenol Brown
Material 7 mm Plywood
Installation depth 120 mm
Case category Light controller 19"
Locks And Catches 2x Snap Catch
Design of compartment 6U 19"
External Width [mm] 550 mm
External Height [mm] 195 mm
External Depht [mm] 305 mm
Weight 4,7 kg
Folding handles 1
Lock 2x snap lock
Strap handles 0
Special equipment adjustable rack rail

869 kr

Alle priser inkl. moms

Salgsrang

i 19" rackkuffert

Kunder som så på dette produkt købte dette

Flyht Pro Case Universal for 19" units

677 kr

10%

købt

Thon Rack Case 8U 12 RA

899 kr

købt

Flyht Pro Case for 19" 3U DMX Controller

418 kr

købt

Thon Case for 3U Lighting Desks

777 kr

324 Kundebedømmelser

5 223 Kunder 4 90 Kunder 3 6 Kunder 2 4 Kunder 1 1 Kunde

4.6 / 5

stabilitet

håndtering

forarbejdning

Retningslinjer for anmeldelser

128 Anmeldelser

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Great!

Anonym 21.07.2014

Just what I needed for my Octatrack - got the rack ears made by Elektron via Thomann too and everything slotted together perfectly in a few minutes.

It's not clear on the description but this item does come with the screws you need.

Solidly built and just the right size with enough space underneath the unit to store the PSU, Cables, Headphones etc...

The ergonomics are vastly improved by the tilted rails, so much better than working with the Octatrack flat on the table.

I like that it has lock holes on the clasps at the side too. Nothing that's going to stop a determined event, but with a cable lock this will stop the opportunist running off with it.

Quite heavy, but that's the trade off for good protection I guess.

If you're gigging with your Elektron gear, this box is an ideal solution!

Highly recommended!

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

perfect for my Soundcraft UI16

IceTone 04.04.2019

constant use and abuse. good protection and great build quality

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Solid and safe case

Raymond E. 08.06.2017

This case was perfect for housing my small light controller, however the first had the catches too tight and they bent when enough pressure was applied to close the case.

Thomann dealt with this quickly and efficiently and replaced it with one with properly aligned catches.

It is a sturdy and well made item and does it's job of protecting the controller perfectly, with room for a power distribution strip and enough space beneath to take the leads. I use it to transport the controller in a well packed car (enen have stuff on a roof rack (but not this case) and, with some 20 years of professional experience behind me, would not worry about having it put in a van with other items.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Great first "performance case" for a small modular system!

hlprmnky 26.11.2018

My use case for this ...case is that I have two 84hp TipTop Audio HEKs that I want to be able to play out with. I have them mounted in this case and use it for both taking my case on the go and also for its "studio" use on a workbench in my office.
Pros: HEKs fit! Light, looks nice, takes stickers well. :)
Cons: With _two_ HEKs mounted, there is a small amount of unavoidable conflict between the mounted rack ears and the riser mechanism for the rails, where you can't get the _entire_ "travel" of the rails because the bottom-most ears impinge on the inside front of the case as they sweep down. You can still get a nice angle to work with, and it's not really fair to expect the case to magically expand by 3mm to accommodate special things that are "rack-mountable" but not rack gear, I don't think.

Anmeld bedømmelse

Læs alle anmeldelser

Thon Rack Case 6U 12 RA

19" Case

19" etui

Kunder som så på dette produkt købte dette

324 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

128 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Thon Rack Case 6U 12 RA

19" Case

19" etui

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

324 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

128 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator