Til sidens indhold

Flyht Pro Case for 19" 3U DMX Controller

4.4 ud af 5 stjerner fra 124 kundebedømmelser

Case for a 19" 3U DMX controller

  • Max. installation depth: 86 mm
  • Material: 6 mm MDF
  • Protection class: IP20
  • Rounded corners
  • Dimensions (L x W x H): 504 x 238 x 116 mm
  • Weight: 4.5 kg
  • Colour: Black
  • Fås siden Juli 2016
  • Artikelnummer 392412
  • salgsenhed 1 stk
  • Vertical HE 3 U
  • Colour Black
  • Material MDF
  • Case category Light controller 19"
  • Locks And Catches 1x Butterfly
  • Number of fixtures 1
  • Design of compartment 3U 19"
  • External Width [mm] 238 mm
  • External Height [mm] 116 mm
  • External Depht [mm] 504 mm
  • Weight 4,5 kg
  • Folding handles 0
  • Lock 1x Butterfly
  • Strap handles 1
  • Special equipment No
418 kr
Alle priser inkl. moms
på lager
1

124 Kundebedømmelser

4.4 / 5

stabilitet

håndtering

forarbejdning

64 Anmeldelser

google translate gb
Der opstod en fejl. Prøv igen senere.
A
Was expecting more
Anonym 21.03.2017
Overall..poor craftsmanship with hammered corrections and slightly crooked joints on some places allover in the item...i did spent some time realigning stuff left and right, just for the looks...but most importantly...my 3U controller was sitting too low on the pre-drilled holes blocking the case joints and lid did not close at all for that...

Redrilling the holes further up just enough did the trick, but now controller upper edge is almost touching the wood surface of the lid, making stacking the case among other staff questionable....in other words the rack base wood inside the controller sits on, either needs trimming or replacement for peace of mind and road abusing the case. On top of that....whole lids right side was slightly misaligned on closure, compared to the left that was properly fitted...

i should have bought the Thomman case for 25 euro more, seems a much better quality choice really, after revisiting its page.
stabilitet
håndtering
forarbejdning
1
2
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
TP
Good Product.
Tony Pauer 05.06.2025
I’m completely satisfied with this case. Everything went perfectly—the case is sturdy, and my DMX controller, which is actually the most common and inexpensive model, suddenly looks like a professional device in it. Yes, I could make such a case myself, but just the materials here in the Czech Republic would cost twice as much as what I paid for this ready-made one. This case is not only safe, but also very attractive—and truly at a great price. Many thanks to Thomann.de!
stabilitet
håndtering
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
m
It does what is says it does
manosg 24.11.2018
You get what you see in the photos. No rack rails, just 2 pieces of wood to hold down your controller. It is road worthy, it is an inexpensive case meant to accommodate an inexpensive dmx controller, all is good here
stabilitet
håndtering
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate de
Der opstod en fejl. Prøv igen senere.
K
Gutes Produkt
KuVA 04.02.2021
Gutes Case, absolut passend für seinen Einsatz. Einzug die bereits installierte Kleinteilebox sitz zumindewst in meinem Fall (Eurolite DMX Move Control 512) an der falschen Stelle, lässt sich aber leicht entfernen.
stabilitet
håndtering
forarbejdning
1
0
Anmeld bedømmelse

Anmeld bedømmelse