Behringer FCV100

Start 360°

Vis oversættelse

Stereo Volume Pedal for Keyboards

With expression pedal function
Adjustable volume minimum
Input impedance: 300 kOhm
Output impedance: 560 Ohm
Resistance of the potentiometer: 50 kOhm
Dimensions: 256 x 72 x 125 mm
Weight: 1238 g
Current consumption: 7 mA
Operation via 9 V battery or 12 V DC power supply unit (both not included - suitable power supply unit: Art. 188460)

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden December 2003

Artikelnummer 166558

salgsenhed 1 stk

Expression Pedal Yes

Volume Pedal Yes

227 kr

Alle priser inkl. moms

Salgsrang

i Volume- og effektpedaler

214 Kundebedømmelser

5 107 Kunder 4 63 Kunder 3 22 Kunder 2 15 Kunder 1 7 Kunder

4.2 / 5

forarbejdning

Retningslinjer for anmeldelser

104 Anmeldelser

umuligt godt produceret til prisen

Den Grumme Mikkel 07.11.2020

Jeg troede ikke mine egne øjne , ører , og fødder - da denne pedal dukkede op i posten - excellent til den uhørt lave pris ! jeg vil nu købe et par stykker til , af samme vare - til DEN pris kan jeg ligesågodt ha en stående under hver synth !

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Nice Pedal

Anonym 17.09.2014

I was surprised at the quality of this unit - I took a chance and ordered it on-line without ever trying it in a shop. The action of the pedal is very smooth and it has some nice features. Firstly, it has never become noisy as my previous volume pedal did once the POTS got a little worn. It has stereo INs and OUTs so you can place it anywhere in your signal chain, and a minimum volume control for greater flexibility.
There is a CV option when you can send a control voltage from OUT2 to another device to control its volume or modulation. The nice thing here is that in CV mode IN1/OUT1 still functions as a regular mono analogue volume control enabling some clever effects in combination with the CV out. The only niggle I had was that the PSU input is 12VDC (centre positive) so it takes up a 12V feed from my power plant (of which there are less then the 9V ones), while the internal battery is just a regular 9V - so why isn't the PSU 9V also? Overall that's a small complaint for a great volume pedal!!!

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Horrendous

Anonym 08.08.2014

Clunky, noisy and just too big. Perhaps an external power supply would improve performance, but I don't want to spend any more money on this, to be honest. A shame. In the end, it was easier to change my set up than to try and incorporate this thing into it. I have been championing all things Behringer for a while now. but on this, I think they dropped the ball.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Big

Anonym 02.10.2014

Bigger than it needs to be. It takes up a lot of space on my pedal board. It doesn't need a power supply to operate as a MIDI control pedal, which is good. It does suffer from the seemingly universal problem of MIDI expression pedals being extremely sensitive towards the upper end.

Anmeld bedømmelse

Læs alle anmeldelser

Behringer FCV100

Stereo Volume Pedal for Keyboards

Stereolydstyrkepedal til keyboards

214 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

104 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Behringer FCV100

Stereo Volume Pedal for Keyboards

Stereolydstyrkepedal til keyboards

Tilbehør og matchende produkter

214 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

104 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator