Gotoh SD90-SL MG Locking 3L/3R N

Start 360°

Vis oversættelse

Clamp Machine Heads Set for Electric Guitar

Configuration: 3 left / 3 right
Self-clamping due to string tension
Smaller string holes on 1st, 2nd and 3rd machine heads improve tuning stability
Construction: Half-closed
Wing: Perloid Keystone Single Ring
Transmission ratio: 1:15
Shaft length (to string hole): 20 mm
Bore: 8.8 mm
Mounting: Screws
Screw bracket angle: 90° and 180°
Finish: Nickel
Includes mounting screws & press-in sleeves
Made in Japan

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden Februar 2009
Artikelnummer 220623
salgsenhed 1 stk
Colour Nickel
Locking Yes
Design Vintage

444 kr

Alle priser inkl. moms

Salgsrang

i 3L/3R-guitarmekanik

183 Kundebedømmelser

5 122 Kunder 4 37 Kunder 3 19 Kunder 2 2 Kunder 1 3 Kunder

4.5 / 5

forarbejdning

Retningslinjer for anmeldelser

112 Anmeldelser

Passten leider nicht!

Micha74 09.01.2019

musste ich zurückschicken weil die Mechaniken für meine Gibson Les Paul Standard 2016 nicht passten...der Lochdurchmesser der Gibson ist zu groß!

abgesehen davon finde ich die Gotho grundsätzlich eine "wacklige " Angelegenheit.
Außerdem sind sie sehr Schwergängig...ist natürlich Geschmackssache

was mich aber am meisten gestört hat ist die Tatsache dass für mich der Klemmmechanismus an sich eher undurchdacht zu sein scheint!

entweder ich bin zu Blöd...aber das "in die Gegenrichtung erst mal zudrehen" wobei ich aber die Seite mitdreht... kostete mich einiges an nerven. Der Zeitgewinn beim Seiten aufziehen den solche locking Mechaniken bringen soll war somit dahin.

Fazit:
selbst wenn dies Mechaniken exakt für meine Gibson Gepasst hätten würde ich sie nicht nochmal bestellen

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Good vintage looking tuners

Anonym 30.03.2016

These tuners look nice and vintage but add the security of modern locking tuners. The locking mechanism is quite simple and consists of the top part of the tuning shaft being able to unscrew over a central shaft within the tuner. They are built similar to old style tuners and may in comparison to more modern tuners like Grover seem a little flimsy but they have not broken om me yet. But please do double check the size of the hole they need to be installed in if they are bought as replacements. In my guitar the previous tuners used a larger diameter hole and since the stud you insert on the top does not screw in to the tuner it self but rather use friction on the wood of the guitar to stay in place they needed to be modified to fit my Epiphone G400

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Almost perfect

Xxlguru 29.07.2020

Pro:
Weight
Functioning
sound
Negatives:
way it looks
Length of the shaft. Might be to short for some headstocks.

They are not heavier than Kluson vintage tuners and do no change the tone. Some heavy locking tuners will ruin the guitars balance and will kill the vibrations of the guitar. This one do not. Guitar stays as it was. Tuning feels good and it is relatively easy to dial in a note. People often ruin their guitars with Vintage tuners with placing heavy modern style tuners. They solve tuning issues and kill guitar sound and make it headstock heavy. This tuners are great option while they eventually do lock and they do stay true to how the guitar tone was with original vintage tuners.

On other side restringing is not as fast as with some other locking tuners. Like with PRS type locking tuners you keep string tension and you lock it down with a screw, Same as with Fender type (Shaller) of tuners only you lock it from the back side. With this tuners you hold a string and you need to turn a tuning peg to lock the string and once you have it tight you can do last half turn to lock it down. So slower string changes and bit awkward. Though once locked it stays locked and tuner works and sounds good, So that is only negative thing about it.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Great upgrade

episg 09.05.2017

Replaced the stock tuners on an Epiphone SG Special with these Gotoh locking tuners and was really impressed by the result. Great quality. The tuning stability has increased significantly, fine tuning is a lot easier and quicker now and restringing is much faster.

(A note for the specific guitar model (Made in Indonesia, Epiphone SG Special 2010): the stock tuners have the mounting screws placed diagonally, so you need to place the new tuners and drill pilot holes for the new mounting screws. Also the peg holes in this guitar are 8mm diameter. The Gotoh bushings that are included are 8.8mm. So, you either need to ream a bit the peg holes or leave the stock bushings.)

Anmeld bedømmelse

Læs alle anmeldelser

Gotoh SD90-SL MG Locking 3L/3R N

Clamp Machine Heads Set for Electric Guitar

Klemmemekanikersæt til elektrisk guitar

183 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

112 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Gotoh SD90-SL MG Locking 3L/3R N

Clamp Machine Heads Set for Electric Guitar

Klemmemekanikersæt til elektrisk guitar

Tilbehør og matchende produkter

183 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

112 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator