Til sidens indhold

Harley Benton Parts Bridgepin Set Bone Eb E

4.6 ud af 5 stjerner fra 170 kundebedømmelser ()

Push-in Bridgepins for Steel String Guitars

  • Set of 6 pieces and one endpin
  • Material: Bones with ebony inlay
  • Endpin diameter at the thickest point: 8.2 mm
  • Bridgepin diameter at the thickest point: 5.2 mm
  • Colour: Natural, unbleached
  • Fås siden Juli 2016
  • Artikelnummer 267044
  • salgsenhed 1 stk
129 kr
Alle priser inkl. moms
på lager
1

170 Kundebedømmelser

4.6 / 5

forarbejdning

108 Anmeldelser

ML
Good fit
Mikkel Lund, Denmark 11.06.2024
Nice pins, a little brighter irl. No glue og stains.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
A
Design is flawed...but the material is good
Anonymous290 20.02.2018
They give off a nice clicky sound when you shake them. They seem durable and don't look half bad either.
The impact on the sound was immediate after I put a new set of strings, the guitar sounded phenomenal!
Now on to the Cons of this product, which are not few in number.
Beware that these pins are relatively straight and thick, measuring about 4 milimeters at the ends (0.15") so they won't fit into tight slots.(I tried to put them on a parlor guitar, and didn't fit the holes)
The groove of the pins didn't allow the ball end of the strings to slide in! One of the pins almost popped out while I was tuning the guitar. They act as if they are unslotted pins.
In the end I had to widen the canal towards the tip of the pinhead to leave a bit more space for the string to cross over the saddle.
This was my personal experience, maybe other were luckier, but other than some annoying design flaws, the pins greatly improve the sound. So that is that.
forarbejdning
6
1
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
BI
Almost like putting on new strings
Benjamin I. 04.11.2026
The guitar (Cort Earth) sounds fresher and a little more powerful. More clarity, more harmonics, too. These pins are somewhat wider than the former plastic units, so I had to enlarge the holes by 0.4mm approx. Easily done with a round diamond file.

They have some negligible variance in diameter that I mention only for the sake of completeness. About 0.15mm between the widest and narrowest. Doesn't matter in practice, they all held very well after enlarging the openings in the bridge.

They are also somewhat different in length. When looking across the row of pins, whose bases I carefully checked were perfectly flush with the bridge, some heads are a tad higher or lower. They can be sanded down to the same height for aesthetics.

Despite these cosmetic imperfections, I give five stars for quality for the tone improvement. The pins and/or the bridge holes will need some rectifying; that's part of the deal. Unlike another bridge/plastic pin combination on my Sigma, the pin heads don't prevent the hand from being placed precisely where needed to mute the strings.

And the top of the pins is left somewhat unpolished so they don't make squeaky noises against the skin. They lock firmly in the bridge after the width adjustment. They don't cost too much; for the price of a coated set of strings you can have a permanent improvement on your acoustic.

All the bone fibers are properly aligned with the axis of the pins, I checked with a magnifier. The tone improvment is so noticeable, it's kinda disconcerting at first. Almost like putting on new strings.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
A
Unexpected great improvement
Anonym 24.11.2021
Perfect completion of bone bridge and saddle which already was a great upgrade for my Ibanez AW54. Very happy for deciding to change also the plastic pins with these ones. Really increased clarity and sustain. I'm amazed of the impact it makes. Totally worth it!
forarbejdning
4
0
Anmeld bedømmelse

Anmeld bedømmelse