Til sidens indhold

Rockboard Flat Patch Y Splitter Cab 30cm

4.8 ud af 5 stjerner fra 143 kundebedømmelser

Y-Splitter Cable

  • Length: 30 cm (11 13/16")
  • Flat Y-splitter cable with rectangular cross-section
  • For splitting TRS stereo signals into TS mono signals or as insert cable for TRS effects loops
  • Space-saving and extra narrow angled jack plugs
  • 2x Separate flexible copper conductors: 20 x 0.12 mm
  • Wrapped copper screen: 34 x 0.12 mm
  • Polyethylene signal isolation
  • PVC external insulation
  • Capacity of less than 10 pF / decimeter
  • Conductor resistance of less than 10 mOhm / Decimeter
  • 1x Angled 6.3 mm TRS jack plug
  • 2x Angled 6.3 mm TS jack plugs (gray / black)
  • Tip = Grey
  • Ring = Black
  • Working temperature: -15 ° C to + 70 ° C
  • External dimensions of cable (W x H): 4 x 3 mm (rectangular)
  • External dimensions of plug (W x H): 12.5 x 7.5 mm
  • Colour: Black
  • Fås siden August 2018
  • Artikelnummer 445215
  • salgsenhed 1 stk
  • Colour Black
  • Length 0,30 m
  • Connector 1 Jack 6,3mm TRS male
  • Connector 2 Jack 6,3mm TS male
  • Connector from Jack 6,3mm TRS male
  • Plug out Jack 6,3mm TS male
69 kr
Alle priser inkl. moms
på lager
på lager

Produktet er på lager og klar til afsendelse.

Information om forsendelse
1

143 Kundebedømmelser

4.8 / 5

Du skal være logget på, for at kunne vurdere et produkt.

BemærkVi tillader kun vores kunder, at afgive en vurdering af det udstyr de har købt hos os. Vi modtager ikke anmeldelser eller vurderinger af produkter fra tredje kilde.

Efter login finder du også i kundencenter under "vurderinger af produkt" alle artikler, som du kan afgive en vurdering af.

forarbejdning

63 Anmeldelser

google translate gb
Der opstod en fejl. Prøv igen senere.
TS
Very happy works good!
Theofanhs Siderhs 07.02.2022
from the few options on the market, Ιt helps me to leave the solid output of the iridium and to enter the input of the delay echoplex which is trs, the second one goes from the trs output of the echoplex to the 2 inputs of the prod2 DI, it works perfectly so far of course the cables are a bit thin and the only thing that helps is that there is more dancing on my pedalboard.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
J
Insert cable
JensWel 21.10.2022
Used to insert EQ into vocal processor in rack.. In this stationary environment the cable works, but it could be too flimsy for taking out and in repeated times.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
A
Intermittent connection
AleksanderS 15.02.2025
I've had it for 2 years, but it has been dropping connection since the day I bought it and first connected it. Have to fiddle with it to get it to the right position to get the sound to go through, and then it might work for a while. Looks like a manufacturing defect or a quality-control issue, which I guess can happen. It would be a really good cable if it was working fine, other users seem to be happy with theirs. Bought it to use it with my Rockboard MOD 3 Patch Bay. The flat cable has great rubber and is really nice and soft, easy to handle, and the L connectors are small and waste no room.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
NS
Great option to split signal
Nigel ST 21.10.2021
Bought this to split the signal from my switcher going into my stereo Ernie Ball volume/pan pedal, which then is connected to two separate amps.
Only 4 star, as one of the amps is always much louder than the other and I couldn't really find the solution yet, how to solve this problem.
Maybe it's me, not the cable, but still it is annoying that one amp's sound is too tiny.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse