Rockboard MOD 3 V2 TRS & XLR Patch Bay

Vis oversættelse

All-in-one patch-bay for pedalboards

Suitable for MOD Slots in RockBoard Pedalboards
Compatible with a wide range of other pedalboards
Acts as a central access point to the effect setup
Establishes clear cable routes to and from the pedalboard
Removable front panel for mounting on or under pedalboards
3x 6.3 mm TRS thru
2x XLR thru (male front / female rear)
1x XLR thru (female front / male back)
1x DC 2.1 x 5.5 mm hollow plug thru
1x AC IEC thru (male front / female rear)
All connections mirrored on the rear side
Dimensions with front panel (W x D x H): 175 x 85 x 47 mm
Dimensions without front panel (W x D x H): 160 x 85 x 33 mm
Weight: 450 g
Includes mounting screws, lock nuts and TX wrench

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

Bemærk Registrer dit køb på shop.warwick.de/en/warranty-registration for en udvidet garanti på 4 år.

30 dages-Money Back garanti

Fås siden August 2019

Artikelnummer 468599

salgsenhed 1 stk

539 kr

Alle priser inkl. moms

Salgsrang

i Tilbehør til rockbag

35 Kundebedømmelser

5 25 Kunder 4 5 Kunder 3 3 Kunder 2 1 Kunde 1 1 Kunde

4.5 / 5

forarbejdning

Retningslinjer for anmeldelser

26 Anmeldelser

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Total disappointment

TsalerA 30.08.2021

This is the reason of my bad evening.
Bought it to use with Rockboard pedalboard + Rockboard PSU. Looks cool, but that's all.
1. You have to do an screw-thread in the native pedalboard fof this thing by youself! Guys at the factory were very busy)) DIY!!!
2. It's patch-bay for the XLRs! Guess what?) XLR plugs do not fit in to the pedalboard holes!
3. Connected this thing to the native RB PSU. And it's very very noisy! Spend an hour looking whats the problem. It's this thing!!! Unpluged PSU fron this thing. connected PSU bypassing this thing, and it become less noisey!

Summary: This thing is patch-bay for xlrs, jacks and power.
You can not use this with XLRs and Rockboard pedalbords. You Can not use this with Rockboard PSU. This thing is useless. Waste of money(

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Can't imagine using my Rockboard without it

AleksanderS 15.02.2025

Been using it in my Rockboard 4.2 for over 2 years now. I have a BOSS RC-600 looper on my board along with 11 other pedals, and it makes everything very convenient and tidy. No added noises to the system, no complaints about build quality. Bought an XLR reverser adapter cable so I can connect 2 mics to it, two of the 1/4" outputs are routed as L & R mono outputs from RC-600, and the third jack output is for Stereo Headphone Out, very convenient. 3x 1/4" TRS outputs can be turned into 6x mono in-outs using Y-splitter cables, which is great versatility. The added 9V output great for powering any extra pedals that are not permanently on my board that I might be using or trying out. It saves a lot of time and mess - no fiddling about with cabling, going under the board to connect or route something - just plug what you need in the MOD 3 patch-bay, connect the power cable, and everything works.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

I love it!

Love Rockboard 02.06.2021

Makes my board a lot neater and it looks cool too! Perfect for singer/guitarists (like me) or anyone that needs a few xlr ports on top of the normal jacks.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Extremely useful passive connections

Cian M. 23.12.2023

Needed this for a pedalboard build a few years back and have used it in a few different routing / signal chains since then.
The other rockboard patchbays look great too but this has the perfect connections for me. The Jack's being TRS for stereo or midi control is great. Makes routing a board with midi controls/foot controller so much neater and easier.
It is also nice for putting my amp foot switch, guitar signal and vocal mic outputs all within a few centimetres. Max setting up at the gig feel like no work at all.

Anmeld bedømmelse

Læs alle anmeldelser

Rockboard MOD 3 V2 TRS & XLR Patch Bay

All-in-one patch-bay for pedalboards

Alt-i-en patch-bay til pedalboards

35 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

26 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Rockboard MOD 3 V2 TRS & XLR Patch Bay

All-in-one patch-bay for pedalboards

Alt-i-en patch-bay til pedalboards

Tilbehør og matchende produkter

35 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

26 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator