Thon 4U Live Rack rail

Vis oversættelse

Rack rail assembly set for 4 U Live Rack

For self assembly in Thon Live Rack 4 U
2 Rack rails stocked with nuts and rubber inserts
Attachment rivets
M6x12 Rack screws with matching washers
Wood block spacers

30 dages-Money Back garanti

Fås siden Oktober 2013
Artikelnummer 325717
salgsenhed 1 stk

133 kr

Alle priser inkl. moms

Salgsrang

i Andet racktilbehør

Kunder som så på dette produkt købte dette

Thon 6U Live Rack rail

141 kr

købt

Adam Hall 61535B4 Rack Strip 4U blk

26 kr

købt

Thon 12U Live Rack rail

180 kr

købt

Thon 8U Live Rack rail

155 kr

203 Kundebedømmelser

5 158 Kunder 4 33 Kunder 3 6 Kunder 2 4 Kunder 1 2 Kunder

4.7 / 5

forarbejdning

Retningslinjer for anmeldelser

80 Anmeldelser

Easily installed and fine fit

Morten Y 02.09.2019

I was a little nervous when I discovered that my newly purchased rack didn't have rails on the back.

However, I was very pleasantly surprised when I saw that Thomann had made this kit for 4U boxes, which contains exactly what you need to install 4U rails.

It took about 20 minutes and the installation went like a breeze.
Easily installed and fine fit. All you need is a drill and a rivet.

With these kits, there is no need to be afraid of reinstalling parts.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Great way to add a rear rack rail to a double door

Mark2018 14.07.2021

The set is perfect, with just a drill and a rivet tool you can add a rear rack rail to a Thon double door and you will not see the difference between the factory side and the DIY side. OK, it is annoying that the rear rail is not installed standard and they do not have the 3RU set (that means sawing and drilling). And OK there is no manual to speak of. but it is pretty plain what needs to be done. Add the nuts and rubber before installing and you are golden.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Perfect for rear rails of Rack cabinet

Jack Major 31.01.2021

I used these to mount the rails on the back of my Thon rack. The high aligned nicely with pre-existing rails and recommend in case you want nice cable management in the back of your rack. Right now I operate with 20+ sockets in the back of it, and no cables are on my floor as I could set up nice rack cable managements in the back of my rack. Great kit.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Solid, with a little twist

WelderOriginal 08.04.2024

Bought this set to add rack units to the back of a Flyht Pro Rack 4U. Fits in perfectly (I did not need the wood blocks). Be aware, though, that the rails do not have a notch on their side to slide M6 nuts. This means if you set up the rails, lock them with the rivets, but you forgot to slide all the necessary nuts for your units beforehand, it's game over and you have to disassemble the thing. I'd recommend locking the rails using bolts instead of rivets.

Anmeld bedømmelse

Læs alle anmeldelser

Thon 4U Live Rack rail

Rack rail assembly set for 4 U Live Rack

Rackskinnemonteringssæt til 4 U Live Rack

Kunder som så på dette produkt købte dette

203 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

80 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Thon 4U Live Rack rail

Rack rail assembly set for 4 U Live Rack

Rackskinnemonteringssæt til 4 U Live Rack

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

203 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

80 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator