Thon Rack Panel 1U 16XLR

()

Vis oversættelse

1U Rack Panel

For 16 Connectors in D-Format
Aluminium U-shaped
Suitable with Ghielmetti labelling strips GBZ8: Article Nr 183915 and K&M lacing bar: Article Nr 190380

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden Juni 2007
Artikelnummer 116624
salgsenhed 1 stk
Rack Units 1 U
Type 19"

85 kr

Alle priser inkl. moms

Salgsrang

i Rackblænder

Kunder som så på dette produkt købte dette

Thon Rack Panel 1U 12XLR

69 kr

10%

købt

Thon Rack Panel 1U 8XLR

63 kr

købt

Adam Hall 87221VR Rack Plate

244 Kundebedømmelser

5 174 Kunder 4 36 Kunder 3 16 Kunder 2 10 Kunder 1 8 Kunder

4.5 / 5

forarbejdning

Retningslinjer for anmeldelser

100 Anmeldelser

holder ikke i maling

Dennis Pedersen 07.09.2024

hvis du skruer en i skrue i så gå maling af. køber ikke den igen

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Mike Kampitakis 27.10.2020

The panel itself is excellent and very well made. I bought it so I could mount some Neutrik adaptors on it. It does the job done but keep in mind that it actualy needs Neutrik Plastite A-Screw-1-8 and Neutrik MFD mounting aids and it's not exaclty clear anywhere (only on customer comments). That was basicaly on Neutrics but I believe you can mount only Neutrics and pro snake adapters on it, and I haven't try the pro snake's ones so I comment this here.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Perfet

aggo 20.04.2020

I bought this paired with 2 behringer splitters in order to have both ins and one of the outs available on the outside of the rack case, while the other out goes directly to the other side in the stage mixer connected to our IEMs. It is compact but spaced enough to be perfectly usable, saving 1 rack unit with respect to competitors. I raccomend this. Please note that screw holes are not lined, so you have to use nuts and washers.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Nope, this is not what you want!

MrMartin17 31.08.2025

I run a film post production studio and since most of our formats contain 8 ch I really need 16 hole panels. As a previous reviewer has already noted, this is the only one on Thomann. Sadly it completely misses the point!

As the reviewer before me mentioned (and I obviously didn’t read before buying) the metal in the panel feels like brittle plastic, the fake Ceracote plastic ”paint” is extremely brittle, the mounting holes for Neutrik D-type connectors are spaced slighty wrong and the screw holes are NOT 3 mm. I used my drillpress and drilled the 32 holes to 3.2 mm and mounted the XLRs with rivets, but that is hardly the perfect solution for everyone.

Cheap rubbish product, avoid at all costs!

Anmeld bedømmelse

Læs alle anmeldelser

Thon Rack Panel 1U 16XLR

1U Rack Panel

1U rackpanel

Kunder som så på dette produkt købte dette

244 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

100 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Thon Rack Panel 1U 16XLR

1U Rack Panel

1U rackpanel

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

244 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

100 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator