Til sidens indhold

1U Rack Panel

  • For 16 Connectors in D-Format
  • Aluminium U-shaped
  • Suitable with Ghielmetti labelling strips GBZ8: Article Nr 183915 and K&M lacing bar: Article Nr 190380
  • Fås siden Juni 2007
  • Artikelnummer 116624
  • salgsenhed 1 stk
  • Rack Units 1 U
  • Type 19"
85 kr
Alle priser inkl. moms
på lager
1

246 Kundebedømmelser

4.5 / 5

forarbejdning

100 Anmeldelser

DP
holder ikke i maling
Dennis Pedersen 07.09.2024
hvis du skruer en i skrue i så gå maling af. køber ikke den igen
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
MK
Mike Kampitakis 27.10.2020
The panel itself is excellent and very well made. I bought it so I could mount some Neutrik adaptors on it. It does the job done but keep in mind that it actualy needs Neutrik Plastite A-Screw-1-8 and Neutrik MFD mounting aids and it's not exaclty clear anywhere (only on customer comments). That was basicaly on Neutrics but I believe you can mount only Neutrics and pro snake adapters on it, and I haven't try the pro snake's ones so I comment this here.
forarbejdning
6
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
a
Perfet
aggo 20.04.2020
I bought this paired with 2 behringer splitters in order to have both ins and one of the outs available on the outside of the rack case, while the other out goes directly to the other side in the stage mixer connected to our IEMs. It is compact but spaced enough to be perfectly usable, saving 1 rack unit with respect to competitors. I raccomend this. Please note that screw holes are not lined, so you have to use nuts and washers.
forarbejdning
0
0
Anmeld bedømmelse

Anmeld bedømmelse

google translate gb
Der opstod en fejl. Prøv igen senere.
m
So cheap, it misses the point of being a D-Type panel
mr.Jelle-Beat 15.08.2025
The first time I'm genuinely disappointed with the quality of products sold by Thomann.
The coating (no paint to be found) immediately shatters and comes loose when looking at it with a screw (even with washers).
The screw holes are ever so slightly too small, so be prepared to drill them all out to M3.
The spacing between the connector holes is non standard and to tight together. XLR connectors are fine, but anything larger (SpeakON, PowerCON, EtherCON, ect) won't fit next to each other. Causing... "interesting" patch layouts.
The frame itself seems to be made of an aluminium/magnesium alloy, super light, but super brittle.
Let's just say it was the only panel with 16 slots on Thomann.
forarbejdning
1
0
Anmeld bedømmelse

Anmeld bedømmelse