Adam Hall DCAM 1 Camera Adapter

()

Start 360°

Vis oversættelse

Camera Microphone Tripod Adapter

Thread mount: 1/4" to 5/8"
Rotation and inclination adjustable
Nickel-plated

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden August 2014
Artikelnummer 344631
salgsenhed 1 stk
Component type Swing Adapter
Type Ball Joint

59 kr

Alle priser inkl. moms

256

Salgsrang

i Holdere

Kunder som så på dette produkt købte dette

Gator Frameworks Camera Mount Mic Stand Adapter

57 kr

købt

K&M 19695 Universal Mount

139 kr

købt

Roadworx Universal Ball Joint

77 Kundebedømmelser

5 47 Kunder 4 21 Kunder 3 5 Kunder 2 2 Kunder 1 2 Kunder

4.4 / 5

forarbejdning

Retningslinjer for anmeldelser

40 Anmeldelser

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

The screw falls out

Robert269 23.08.2020

This is a nice and easy way to mount something that has a standard 1/4 inch thread to a mic stand. If you want to use your camera on a mic stand occasionally and don't care for getting a "real" tripod for example.
I use it to attach my Zoom portable recorders.

It can, of course, not take any heavy loads, but a Zoom H6 seems to work well at least.

One drawback is that the screw actually quite easily falls out of the slit since the hole is big enough for it to slide right out. Normally and this type of gear you would actually have to screw it out, but not in this case. I always have a camera quite release plate mounted to it so that the screw doesn't fall out and get lost.

So, for lighter gear, as an easy option to attach equipment with a standard 1/4" tripod mount it works well. Just don't lose the screw.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Perfect for what it does...

Jon4163 19.10.2015

Great little device!

I am using this with a small camcorder attached to a microphone stand and it works perfectly for what I need.

Firstly, the relevant angle you want is set, then the ball-head adjuster locked with the plastic wing-nut (metal threaded), keeping my device firmly in place - and, as an added bonus, the upper locking screw (between camcorder and plate) has a rubber cushion to prevent any marking of the camcorder/device used keeping it very firmly in place.

All in all, a handy little device, which is very well made. I would have no hesitation in recommending this piece of equipment to anybody!

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Great quality and stable

MiloSK 07.05.2021

Very good adapter for recorders like the Zoom H6 or a smaller camera. Not good for big and beefy DSLR, but good for smaller ones definitely. Great price as well!

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Jzohsuh 28.11.2018

Use: mounting zoom h5 on a mic stand

It's ok, but the 1/4'' screw is slightly too long for the zoom, so i added in layers of card to allow it to tighten without breaking the zoom h5's mount.

Does the job though, is sturdy enough. I wouldn't trust it with a heavier mirrorless/DSLR camera, but would be fine for smaller gopro/point and shoots/camcorders etc.

Anmeld bedømmelse

Læs alle anmeldelser

Adam Hall DCAM 1 Camera Adapter

Camera Microphone Tripod Adapter

Kameramikrofon Stativadapter

Kunder som så på dette produkt købte dette

77 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

40 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Adam Hall DCAM 1 Camera Adapter

Camera Microphone Tripod Adapter

Kameramikrofon Stativadapter

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

77 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

40 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator