Rode RM2

Start 360°

Vis oversættelse

Microphone Clamp with Swivelling Joint

Incl. thread adapter from 3/8" to 5/8"

Suitable for the following Rode models

Broadcaster
Classic II
K2
NT1000
NT2000
NT2-A
NTK
Podcaster
Procaster

30 dages-Money Back garanti

3 års Thomann garanti

Fås siden December 2006
Artikelnummer 108342
salgsenhed 1 stk
Component type Pivot

132 kr

Alle priser inkl. moms

144

Salgsrang

i Holdere

Kunder som så på dette produkt købte dette

Sennheiser MZQ 4 black

120 kr

købt

K&M 23550 Microphone Stereo Bar

107 Kundebedømmelser

5 69 Kunder 4 28 Kunder 3 7 Kunder 2 1 Kunde 1 2 Kunder

4.5 / 5

forarbejdning

Retningslinjer for anmeldelser

55 Anmeldelser

Røde-kvalitet

Skipper88 26.11.2019

Fin forarbejdning og hurtig leverance.

Anmeld bedømmelse

Synes du at denne vurdering er forkert eller af en anden grund ikke læselig? Vær venlig at skrive i det følgende kommentarfelt hvorfor og hvis muligt din email-adresse, så vi kan give dig en tilbage melding til din kommentar.

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Exellent

Ivica G. 26.02.2017

This is a must have accessories for anyone who have Rode microphones. With this Rode RM2 mis stand adapter i am able to use my Rode Nt1A as a Overheads on stereo bar, Again NT1A as bottom snare microphone, top scin Tom an Floor ....Rode microphone mounting nut is also included which is nice. All in all very good alternative to original spider type Rode shock mount for a great price.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

for Rode NT1-A

jolter 02.07.2021

Does the job.

Pros. making easier handling the Rode mic positioning when shockmount is not necessary to use (micing instrument or cabinet etc)

Cons. not very good connection to the mic Rode NT1-A for example. The thread of the nut of RM2 is reaching the thread of the Rode NT1-A only partly and does not make feel very confident about the safety of not dropping the mic when moving it around for positioning etc.

Anmeld bedømmelse

Vis oversættelse

Vis original

Der opstod en fejl. Prøv igen senere.

Good alternative

Mike Kampitakis 20.12.2018

I bought this as an alternative to my rode shock mount (included on microphone package). The shock mount was good but unpractical for some cases. This one is smaller, so it can allow you microphone placements on a variety of situation, when you don't really need a shock mount to do that. The clamp is steady and way more practical, but it will not eliminate any movement of the microphone itself, occurring during recordings.

Anmeld bedømmelse

Læs alle anmeldelser

Rode RM2

Microphone Clamp with Swivelling Joint

Mikrofonklemme med drejeled

Kunder som så på dette produkt købte dette

107 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

55 Anmeldelser

Smart Navigator

Serveret med kærlighed!

Rode RM2

Microphone Clamp with Swivelling Joint

Mikrofonklemme med drejeled

Kunder som så på dette produkt købte dette

Tilbehør og matchende produkter

107 Kundebedømmelser

Du skal være logget på, for at kunne vurdere et produkt.

55 Anmeldelser

Sammenlign valgmuligheder

Smart Navigator